markus frei wrote: > I have at least 2 issues with freevo 1.8.1 (installed in mint 6 from > repositories and using tvtime with a pinnaclesys tv pro card): > > 1). Tvtime itself works great, and I'm using frequencies to tune the > channels, as that gives me better quality and I don't have to finetune. When > freevo adds it's info to the tvtime stationlist.xml file, it also adds "US > Cable" to the band identifier. This makes it impossible to actually tune in > to the channel. When I then edit the stationlist.xml file and change "US > Cable" to "Custom", then restart freevo, it works. The problem seems to be > that after a PC restart freevo again puts the "US Cable" into the file. Does > anyone know where I can change that behavior? > It's a bug. I patched it a long time ago when I was using tvtime but never submitted it and now it's long gone (I'm using ivtv). It wasn't difficult to patch so if you have the time and can submit a patch that would be great. From what I remember I changed it so that when using frequencies I had Custom set as the country in freevo.conf then patched tvtime.py so that it in turn set Custom in it's xml file instead of US Cable when it saw that. I could be wrong though it was around 3 years ago. > 2). I can't get any recording from TV to start. I do get a file with the > scheduled recording info, but no recording itself. I tried the instructions > on the following Link where there is a bash script that is run to start > mencoder, http://freevo.sr-club.de/ and I also tried the freevo builtin > things by just uncommenting the mencoder parts in my local_conf.py file (the > user's file) and no recording started. If I do everything from the terminal > it works, but as I'm not a scripter I don't know how to get the correct info > from freevo to go into the bash script. Can someone help me here? > > Thanks. > We'll need some more info - the relevant settings from your config and excerpts from main.log and recordserver.log.
John ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users