On 13/06/2010 7:43, Stephen Rowles wrote: > Hi all, > > I've finally cleared enough room to get my AC3 capable amp and speakers > set up in the house :). I've changed my xine config to output ac3 when > viewing DVD's and it's all funky, spdif output via optical into the amp > and it all works grand. > > However music and stereo sound still go to the TV (for normal TV > viewing). What I would really like would be able to send the audio to > both the telly via HDMI and to the amp via SPDIF. So that I could listen > to music with the telly off, but without always needing the amp on to > hear anything. > > Currently to get mplayer to output the sound via my HDMI calbe I use the > following options: > > -ao alsa:device=hw=0.3 > > I can change this to be: > > -ao alsa:device=hw=0.1 > > Which will then output to the amp instead, is there anyway of specifying > 2 output devices?? > > I found this on the alsa wiki: > > http://alsa.opensrc.org/.asoundrc#Dupe_output_to_multiple_cards > > about configuring duplicate output to multiple cards.. but it looks > seriously scary and I didn't really know where to start > > Is there an easier way I can do this with some simple parameters to > mplayer?? > > Cheers, > > Steve. Hi Steve,
Something very similar is discusses here, http://lists.mplayerhq.hu/pipermail/mplayer-users/2007-May/067148.html, at a glance it seems a more straight foward example, might be easier to follow. John ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users