>Then open that .fpi file in a text-editing program. Look down the list until you find an entry of .... PrimaryRepeatCount=999 .... and just change that number to whatever you want it to be, then resave it.
Hi all, This above process was something that some customers did in the 3.x version of FusionPro but there is a catch. The 3.x product was not optimized to compose "deep stacks" of greater than 999. So while you can set this value higher than 999 and compose the job, it can be extremely slow. We resolved this in the 4.0 release last fall. You can now set the stack count higher in FusionPro Imposer and the composition will be faster on deep stacks. Hope this helps. --Mark Hilger Product Manager Printable Technologies, Inc. -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --