Goodevening, I hope someone can clear a problem for me. We need to use office mode to assign ip address to clients. Without office mode everything works fine, I can get a connection with a secureremote client to our firewall and ping any address behind it and all trafic passes trough without problems. When I enable office mode I get authorised by the firewall but afterwards there is no traffic possible trough the tunnel. When I setup office mode to use a ip pool outside the subnet of our internal side of the firewall the connection fails. In the log I only see that I am authenticated successfull and I get a ip address assigned but then it ends. When I setup office mode to use a ip pool inside the subnet of our internal side of the firewall I get a connection but there is no traffic possible trough that tunnel. I have a new network adapter with a ip address from the pool but nothing happens. On the firewall I see no traffic but only sometimes a broadcast from that client on the subnet. On the clients log viewer I get the message: encryption fail reason::Packet if from physical ip address but office mode is active.
I have read the office mode documents on and on but cannot find why its not working. Anyone with an idea is welcome, thanx in advance. With kind regards, Fabian ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
