Thanks for the responses. They're greatly appreciated.
Just to clarify, the SMC is the Smart Management Center. right?
l went to the management server object and selected "Apply for VPN-1
Power/UTM Control Connections", but it would not let me save it saying:
"Applying NAT on VPN-1 Power/UTM control connections is allowed only
when the rule is installed on a single gateway".
The install on Gateway is set to "all".
l have installed the license on the new gateway using Smart Update,
and yes SIC is working fine.
When l check the new gateway after attempting to push policy (it
fails with a timeout), l see that "fw stat" shows the right policy
but l cannot access the outside world from the inside networks of the
new gateway, not from the gateway itself. SIC is also lost as the
gateway does not seem to accept any connection.
when l unload the local policy l can access the outside world only
form the new gateway, and SIC is re-established.
This is driving me crazy.
The rules l have for he new policy (that is only pushed to the remote
gateway) allow for connectivity between the management networks of
the original data center to any of the networks behind the new
gateway. l also have a rule allowing all outbound from the networks
behind the new gateway, yet nothing seems to work.
Help!!!!!
Al
At 12:25 PM 8/13/2007, Sergio Alvarez wrote:
Deploying a remote gateway is similar to work on any distributed
environment, just bare in mind that if you go through Internet, NAT will be
envolved in the communication between this new box and your Smartcenter.
- The NAT tab of the SMC object has a check mark you must check to apply the
NAT rule to CP control connections
- You will need a static NAT for the SMC to be able to receive logs from the
external gateway
- Off course you must make sure security policies on any other gateways
between SMC and remote gateway have required rules to allow traffic on both
ways
- Regarding the configuration of security rules for this particular remote
gateway, just make sure only rules that are supposed to be used by it have
the corresponding object in the "install on" column of the rule base.
If you were already able to establish SIC, you should also be able to use
SmartUpdate to attach the corresponding license.
About the issue with Web Intelligence, the other guys above me have already
touched all possibilities... I think.
Hope this helps...
Regards
On 8/12/07, Jean-Paul Baillon <[EMAIL PROTECTED]> wrote:
>
> Remotely managed gateway = Distributed Installation
>
> You will find a lot of docs on CP website
> http://www.checkpoint.com/support/technical/documents/index.html
>
>
> JP
>
> -----Original Message-----
> From: Mailing list for discussion of Firewall-1
> [mailto:[EMAIL PROTECTED] On Behalf Of Alan
> Choyna
> Sent: Monday, 13 August 2007 9:10 AM
> To: [email protected]
> Subject: Re: [FW-1] Deploying new gateway to be remotely managed.
>
> Thanks Ray (and Sin) for your advice.
>
> Is there an SK for building and deploying a policy for a remotely
> managed gateway? or can anyone give me the basics?
>
> Thanks in advance,
>
> Alan
>
> At 05:15 PM 8/12/2007, Ray wrote:
> >There's an SK article on what protections require a WI license.
> >CPMAD, SQL Injection, LDAP Injection, and one other thing, if I recall
> >correctly. If you un-check those, you should be OK.
> >
> >Web Intelligence's biggest failing is that it does not work on SSL
> >traffic, which is where you really want to protect this kind of stuff.
> >FW-1 can't do SSL termination, which severely limits its inspection
> >ability.
> >
> >Apparently there used to be an add-in OPSEC card that did allow FW-1 to
>
> >do SSL inspection, but the vendor got bought out late last year and the
>
> >product was discontinued.
> >
> >Ray
> >
> >
> >>From: Alan Choyna <[EMAIL PROTECTED]>
> >>Reply-To: Mailing list for discussion of Firewall-1
> >><[email protected]>
> >>To: [email protected]
> >>Subject: [FW-1] Deploying new gateway to be remotely managed.
> >>Date: Sat, 11 Aug 2007 14:41:48 -0500
> >>
> >>Hi Guru's,
> >>
> >>We've just built a new SPLAT R62 gateway at a new data center to be
> >>remotely managed by a management server (with the same version of
> >>R62) at another data center.
> >>
> >>l was able to SIC the new gateway to the management server, so it is
> >>now ready to have a policy pushed to it.
> >>
> >>This is our first experience of setting up a remotely managed gateway,
>
> >>and l don;t know how to set up it's policy on the management server.
> >>
> >>Can some please advise on the initial configuration of the policy for
> >>the new gateway on the management server?
> >>
> >>After getting SIC with the new gateway on the management server l
> >>cannot push policy to the cluster even when de-selecting the new
> >>gateway. l get the error message:
> >>
> >>Security and Address Translation Policy Verification:
> >>Additional licenses for Web Intelligence are required.
> >>You have (0) Web Intelligence license installed, while (1) gateway is
> >>.involved in Web Intelligence protection.
> >>
> >>How do l disable web Intelligence on the new gateway? Since l cannot
> >>connect to it remotely as yet (no policy). l have not yet installed
> >>it's correct license, it's still running on the eval license for now.
> >>
> >>Thanks in advance for your advise,
> >>
> >>Alan
> >>
> >>
> >>Alan C. Choyna
> >>Director of Infrastructure
> >>
> >>Pathfinder Associates, LLC
> >>
> >><http://www.pathfinderassoc.com/>http://www.pathfinderassoc.com
> >>Internet Strategy Business Consultants
> >><mailto:[EMAIL PROTECTED]>mailto:[EMAIL PROTECTED]<mailto:
achoyn> >>[EMAIL PROTECTED]>.com
> >>
> >>Business telephone (312) 372-1058 ext 6003. Mobile (773) 255-6662
> >>
> >>
> >>=================================================
> >>To set vacation, Out-Of-Office, or away messages, send an email to
> >>[EMAIL PROTECTED]
> >>in the BODY of the email add:
> >>set fw-1-mailinglist nomail
> >>=================================================
> >>To unsubscribe from this mailing list, please see the instructions at
> >>http://www.checkpoint.com/services/mailing.html
> >>=================================================
> >>If you have any questions on how to change your subscription options,
> >>email [EMAIL PROTECTED]
> >>=================================================
> >
> >_________________________________________________________________
> >Tease your brain--play Clink! Win cool prizes!
> >http://club.live.com/clink.aspx?icid=clink_hotmailtextlink2
> >
> >=================================================
> >To set vacation, Out-Of-Office, or away messages, send an email to
> >[EMAIL PROTECTED]
> >in the BODY of the email add:
> >set fw-1-mailinglist nomail
> >=================================================
> >To unsubscribe from this mailing list,
> >please see the instructions at
> >http://www.checkpoint.com/services/mailing.html
> >=================================================
> >If you have any questions on how to change your subscription options,
> >email [EMAIL PROTECTED]
> >=================================================
>
> =================================================
> To set vacation, Out-Of-Office, or away messages, send an email to
> [EMAIL PROTECTED]
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your subscription options,
> email [EMAIL PROTECTED]
> =================================================
>
>
#####################################################################################
> Important: This electronic message and attachments (if any) are
> confidential
> and may be legally privileged. If you are not the intended recipient do
> not
> copy, disclose or use the contents in any way. Please let us know by
> return
> e-mail immediately and then destroy this message.
>
>
#####################################################################################
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to [EMAIL PROTECTED]
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> [EMAIL PROTECTED]
> =================================================
>
--
Sergio Alvarez
(506)8301342
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
