Hi, We have just added a new separate network accessible via the wan router with address 10.77.6.0/24. In our head office where the firewall is located our local lan is 172.16.4.0/24. We can access all wan networks.
On the 10.77.6.0/24 network, there's a samsung pabx (idcs 100). I've created 2 host nodes to represent both the processor and the voice. I've assigned each with a 10.77.6.x address and assigned it on the firewall with a public address (pa.xx.yy.zz) and to hide/natted statically behind this address. I've setup the samsung phone (5021d) server ip to point to the public address (pa.xx.yy.zz). I've allowed the tcp and udp ports it requires (tcp 6000, 9000, 30000-30030, udp 6000 and 30000-30032). >From an external/remote user working from home, the phone tries to connect but the firewall drops the packet (the drop rule - which is the last rule). This means that the rule I've set is not being processed or not being used at all. Even if I set the rule to accept any any, it still immediately goes to the drop rule. No other info are generated. Any ideas anyone? ta czar ---------------------------------------------------------------- ANS Communications ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
