1) Change /etc/system file and add following lines at the bottom. (replace
qfe with hme if you want to force hme interface)
set qfe:qfe_adv_autoneg_cap=0
set qfe:qfe_adv_100fdx_cap=1
set qfe:qfe_adv_100hdx_cap=0
set qfe:qfe_adv_10fdx_cap=0
Than reboot the machine.
2) How to check whether its running full duplex
(A) you can run /etc/opt/SUNWconn/bin/nettr -debug that will show
you the speed.
(B) you can run command ndd /dev/qfe link_speed (1 shows 100
MBPS 0 shows 10MBPS)
ndd /dev/qfe link_mode ( 1 shows full
duplex 0 shows Half duplex)
-----Original Message-----
From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 15, 2001 9:07 PM
To: [EMAIL PROTECTED]
Subject: [FW1] How to know the duplex and speed setting of Solaris
NIC??
Hi.. Dear all
I have checkpoint installed on a Solaris box. But I don't know how to know
the duplex and speed setting of Solaris NIC?
Many thanks
TOng
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
