Hi
Thanks to all who replied on this.
A virtual beer to you all (real ale of course, no chemical rubbish ;-)
Cheers
Tim Higgins
[EMAIL PROTECTED]
Sent by: To:
[EMAIL PROTECTED]
[EMAIL PROTECTED] cc:
[EMAIL PROTECTED]
kpoint.com Subject: RE: [FW1]
Too Many Internal Hosts Detected
09/06/00 12:03
couple of things to note.
1) FW counts hosts (on single gateway versions) on how many IP ADDRESSES
are
on any interface OTHER than the external.if
2) Make sure the external.if is the "outside" host
3) Removing your host table on the firewall could help. This keeps a log of
IP/MAC addresses used for outbound use.
-thomas poole
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 09, 2000 8:41 AM
To: [EMAIL PROTECTED]
Subject: [FW1] Too Many Internal Hosts Detected
Hi
We keep getting "Too Many Internal Hosts Detected" from one of our remote
firewall (50 Node license).
We have DHCP running on the site but there should be less than 40 active
devices at any one time.
We have been advised in the past to clear the DHCP database and reboot
firewall - it seems to clear up but then starts again !
Any other ideas on how we could cure this (and no emails from CP suggesting
upgrade to Enterprise at all sites ! ;-)
Cheers
Tim Higgins
#**********************************************************************
This message is intended solely for the use of the individual
or organisation to whom it is addressed. It may contain
privileged or confidential information. If you have received
this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use,
copy, alter, or disclose the contents of this message. All
information or opinions expressed in this message and/or
any attachments are those of the author and are not
necessarily those of Hughes Network Systems Limited,
including its European subsidiaries and affiliates. Hughes
Network Systems Limited, including its European
subsidiaries and affiliates accepts no responsibility for loss
or damage arising from its use, including damage from virus.
#**********************************************************************
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
#**********************************************************************
This message is intended solely for the use of the individual
or organisation to whom it is addressed. It may contain
privileged or confidential information. If you have received
this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use,
copy, alter, or disclose the contents of this message. All
information or opinions expressed in this message and/or
any attachments are those of the author and are not
necessarily those of Hughes Network Systems Limited,
including its European subsidiaries and affiliates. Hughes
Network Systems Limited, including its European
subsidiaries and affiliates accepts no responsibility for loss
or damage arising from its use, including damage from virus.
#**********************************************************************
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
