Hi all,
I recently changed the IP address of the north side of my
firewall module (hme1). On the module, when I do a fwstart, I
get a "Authentication command fetch failed" and the local policy
is loaded. However, from the management console, I can push the
policy down onto the module successfully. The policy is pushed
onto the south side of my firewall (hme0).
They're both running the same version of FW.
1) Has anyone ran into this problem before?
2) I did a fw putkey on both the console and the hme0 but NOT the
hme1interface of the module. Is there any other possible cause
of the problem besides doing a fw putkey for the hme1 interface
also?
3) when doing a fw putkey on the management server, it breaks my
connection to the other existing firewall modules. This means
that besides stop/starting the fw console and the new fw modules,
I also will need to do the putkey again on the existing fws and
stop/start on those also. Is there anyway that I can add a
module onto the console without having to resync keys with the
existing fw modules?
Thanks in advance,
-hungdan
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
