Since going to 4.1 SP2 I've had the same problem on a few of my remote
firewalls. However, I haven't encountered the problem you outlined in item #3.
CheckPoint support just says I should keep trying a "putkey" until the
problem disappears.
At 04:32 PM 9/12/00 -0400, [EMAIL PROTECTED] wrote:
>Hi all,
>
>I recently changed the IP address of the north side of my
>firewall module (hme1). On the module, when I do a fwstart, I
>get a "Authentication command fetch failed" and the local policy
>is loaded. However, from the management console, I can push the
>policy down onto the module successfully. The policy is pushed
>onto the south side of my firewall (hme0).
>
>They're both running the same version of FW.
>
>1) Has anyone ran into this problem before?
>2) I did a fw putkey on both the console and the hme0 but NOT the
>hme1interface of the module. Is there any other possible cause
>of the problem besides doing a fw putkey for the hme1 interface
>also?
>
>3) when doing a fw putkey on the management server, it breaks my
>connection to the other existing firewall modules. This means
>that besides stop/starting the fw console and the new fw modules,
>I also will need to do the putkey again on the existing fws and
>stop/start on those also. Is there anyway that I can add a
>module onto the console without having to resync keys with the
>existing fw modules?
>
>Thanks in advance,
>
>-hungdan
>
>
>
>
>================================================================================
> To unsubscribe from this mailing list, please see the instructions at
> http://www.checkpoint.com/services/mailing.html
>================================================================================
>
-
"As soon as men decide that all
means are permitted to fight an evil,
their good becomes indistinguishable
from the evil they set out to destroy."
--Christopher Dawson
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
