The traceroute command has an option, "-i qfe0", to give the interface to
start the traceroute.
If your network masks are classless, add entries into /etc/netmasks to
reflect what is
in use. The "ifconfig" -a command can so you if the netmasks are correct.
This should be a start.
--
Glenn Crist
330 - 659 - 1705
Sr. Network Engineer
Bell & Howell Publishing Services
3900 Kinross Lakes Parkway
Richfield, OH 44286-9381
-----Original Message-----
From: Francisco Rebelo [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 16, 2001 9:23 AM
To: Firewall-1 list (E-mail)
Subject: [FW1] Solaris routing concern
Sorry if this is not exactly on topic but I'm stuck...
Here is my situation, I'm new to Solaris and I have a Sparc 220r with 1 HME
NIC and 1 QFE NIC. This is the box I would like to put FW-1 on (actually
this is about the 5th time I've started from scratch trying to get this to
work). The FW-1 docs tell me to make sure the box routes properly before
installing FW-1, that's my problem. HME0 is my external interface and QFE0
is my internal. (This is all currently in a test environment) I can, with
my internal PC, ping the internal and external interfaces of the Solaris box
but cannot ping the pc off the external interface. If I'm on the Solaris
box I can ping everything. When I do a traceroute on the Solaris box it
warns me that multiple interfaces were detected and then uses the first
interface it finds as the source regardless of where I'm routing to. I
looks to me like it is completely ignoring the routing tables, is this
normal or am I missing something?
Cisco Rebelo
Network Manager
Millbrook Incorporated
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
