On Fri, Jul 8, 2011 at 12:33 AM, Phil Behnke <[email protected]> wrote: > Hi All, > > I've been have a issue streaming data from an FPGA to a PC using the FX2LP > and LibUSB. The FPGA is sending 8 bits to the FX2 at a rate of 20MHz (152 > Mbps) using isochronous mode. The problem I'm having is that I cannot get > data from the FX2's buffer to the PC fast enough and the buffer becomes > full, causing me to miss some data. I'm not sure where the bottle neck is.
Typically on the PC side and typically it is for IN transfer. > The FX2 is set to iso mode, with 1024 bytes per packet, and 3 packets per > microframe, so I should have enough bandwidth to empty the buffer. That is high speed high bandwidth ISOC and the best speed you can get is 24MB/sec (3 x 1024B /125us). The host will be able to schedule the transfer but you must make sure that the IN request is always there. Using async transfer helps. What is your OS and your USB chipset? They play a part as well. > I'm attached my firmware (fpga.c), descriptor file, and libusb driver. The > driver was written in Python using python-libusb1 wrappers. I have a LED on > the FPGA board which will read the FULL flag on the FX2 and light an LED > when full. By inspection, it looks like the LED is lit at about 50% duty > cycle. I've been working on this for quite a while and would really > appreciate any tips. > I am not familiar with python-libusb1. pyusb is more matured. Unfortunately it does not support isoc transfer yet. Maybe you want to use libusb-1.0 and C to see if that helps. Take out all the other USB device attached to the same root hub and see if that helps. This thread may help, it is not for isoc transfer but the idea should be the same. http://libusb.6.n5.nabble.com/Fwd-FT2232H-asynchronous-maximum-data-rates-td4519549.html You can probably post the question to libusb mailing list. There are quite a few USB experts there (both Linux and Windows). http://www.libusb.org Travis has got a FX2LP development board and he will try to develop the benchmark firmware to test high speed high bandwidth isoc transfer for libusbk in the future. Right now we are using AVR UC3 (AVR32) sponsored by Atmel for high speed USB related testing but it only support max packet size of 512 and the MCU core may still be slow to deal with high speed USB. http://code.google.com/p/usb-travis/ -- Xiaofan ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Fx2lib-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/fx2lib-devel
