On Sunday, June 22, 2003, at 08:17 AM, Herbert Goodfriend wrote:
The I/O door on my Lombard has detached from its springs so that it is loose and does not completely close. Apple instructs that it can be re-seated by pulling outward at the center of the door and then releasing. This is not working for me.
Is there any other way to re-attach the door to the springs without disassembling the entire machine?
I had the same problem. I couldn't work out any way short of disassembling the machine, which is what I did. Fortunately I had the teardown pdf to follow. It wasn't as hard or as nerve racking as I feared, but you have to _completely_ strip the machine, even removing the motherboard, to get at those springs. It was successful, though.
--------------------------------------------------------------------------
Jim Eddy James Eddy Woodworks
[EMAIL PROTECTED] Princeton, NJ
---------------------------------------------------------------
Jim,
Thanks for the feedback. I do have the teardown PDF. As this is not an emergency, and the machine has a couple of other non-urgent problems, I will just wait until I have the time to take it all apart and fix everything at once.
Herb
-- G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
