Recently swapped the 233mhz chip on my wallstreet for a 300mhz I saw on ebay. I am running 512mb of ram, and OSX10.2.6. The machine is getting very very hot. So hot that if you lift the keyboard and touch the large heatsink plate it gets too hot too touch. The fan never seems to operate. Any ideaas or commetns aprecaited. Specifically: How hot is too hot? Is there any particular aspect of my setting causing the heat 9eg shoud I reduce the ram, or switch back to the 233mhz chip? Finally, is there anyway to test the fan short of pulling it out?
Many thanks as ever. Chris -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
