Lombard won't boot after HD replacement

[Kevin Thomas]

I'm stumped...I was running Panther on my Lombard 400 with 192 MB Ram 
and the original 6 gig hard drive.  I decided to replace the 6 with a 
10 gig.  So I go thru the install of Panther and when it finishes the 
first disc it goes right back to the beginning of the install 
process....never asks for the second disc.  Reboot won't see the hard 
drive to startup but goes to the cd and boots off the disc.  The hard 
drive shows up on the desktop but it won't boot.

So, I went through the whole process of Norton, Disk First Aid, 
Initializing, etc...no luck...same thing...so i tried to install OS 9.1 
first and the install went through fine but again it won't startup from 
the hd.  It keeps going to the cd.  If I take the cd out, I just get 
the flashing question mark in the folder in the middle of the screen.

I checked Apple's web site for any updates and it doesn't list any 
needed.  Tried the Firmware updates anyhow but it states they are not 
needed for this machine.

Any ideas?  I've taken out the top RAM and still nothing.  My next step 
is to put the 6 gig back in.  ugh!
---
Kevin

--
G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
-- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |
     Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>


---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------