Today I connected an external firewire HD to my 800 MHz Ibook G4 running 10.3.4. System profiler sees it giving the following info:

SYM13FW500-DISK DRIVE

Manufacturer:  LSI Logic
Model:  SYM13FW500-DISK DRIVE
Speed:  400 MB/sec Speed
Firmware Revision:  10532909
Unit Spec Id:  24734
Unit Software Version:  10483

The drive itself is labelled as a Maxtor model 54098U8. The problem is the drive doesn't show up on the desktop and Disk Utility doesn't see it. Any ideas? Or recommendations on other disk utility software? I used techtool pro with my powermacs running 8.6, but I haven't upgraded to the OSX version yet.

peace, love, and joy,

Samantha


-- G-Books is sponsored by <http://lowendmac.com/> and...

Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
-- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |

     Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>



---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------




Reply via email to