Hi, I have a Lombard. I tried to put Panther on it and it didn't work. Had a hunch I had some bad memory - or actually one of the chips that is recognized half size due to configuration. Anyway ordered the right chip (low profile for lower slot) now have 64 meg (OEM) on top, and 256 on bottom and the system profiler sees both. Now when I put the panther disk in it continually freezes on the first installer screen (see the outline of the screen but no type) and the computer is frozen - trackpad does work/clock not counting etc.) and can't go anyfarther. Rebooted about two dozen times with no success - freezes at same point. I have 9.2.2 currently installed. Any suggestions? Option? - can I put the bottom memory into the top slot and try with just that? or switch them? I know OSX is finicky with memory. TIA Linda
-- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
