On 10/10/02 7:32 PM, "Richard Starr" <[EMAIL PROTECTED]> Spew into
the Cybertrough:

> I got a freebie 133 ata card with my Maxtor 80gb 7200rpm drive ($100 on sale
> at Staples a few months ago. ) I emailed the manufacturer of the card and they
> said no way for the Mac. (I don't think it was Acard.) Too bad since I had to
>pay  $80 for a similar Mac card recently.
> 
> There was no Mac driver on the cd in my case.  What you'd probably need is a
> card flasher to convert it to Mac compatibility.
> 
> You might check with Maxtor or the maker of the card.  I emailed the
> manufacturer of the big chip on the board, who actually built the card for
> Maxtor. (Can't temember the name.) I got a quick reply by email.
 
> --- You wrote:
> I read somewhere there was some deal between Maxtor & Acard (who makes PCI
> IDE controllers for Max), so could this Maxtor ATA/133 card be used in a
> Mac?  (the above Mac driver on a CD kinda implies this).
> --- end of quote ---


You can use those cards, but you have to mod them.  Not a Flash Utility, but
a Solder Job.  Too much hassle.
-- 
==============================================================
Kyle H. Hansen
Apple Certified Technician
Apple Solution Expert
Macintosh Server Administrator
[EMAIL PROTECTED]
==============================================================




-- 
G-List is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
 -- We have Apple Refurbished Monitors in stock!  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-List list info:       <http://lowendmac.com/lists/g-list.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to