I bought ( traded for ) a DA/466/133 I then bought an OEM Dual533CPU set-up for it I installed the 533's hit the CUDA and no startup chime (fans work, no HD, no video, red light comes on MB) I swapped around ram, cussed, still no chime I replaced the 466 (never tested initial Tower) all worked fine (ram from my G4/100 (133/cl3) wasnt reading, the one that came with the Tower was, still started even though wasnt reading one of two ram sticks) I cussed some more =(
Ive been reading and doing research but have found nothing other than things like firmware and batteries ( I would assume if worked with the 466 then should work with the 533's without any adjustments) I assume the CPU is getting power and is seated correctly because the CPU fan ( powered off the CPU board) is running as it should.... but everything else is dead, other than the tower fan and the red light on the motherboard. a bad cpu is the only thing I can deduce, I really want this thing to work, but wanting isnt doing me much good =( any ideas? Im fresh out...is there something special you need to adjust when adding a dual cpu to a previously single set up? thanks for any help, this is my last chance... Ralph -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
