I also have the Adaptec 2930 SCSI card inside, but nothing attached to it. It shows up fine in System Profile, so I'm assuming it will work fine. I'm using 40GB & 80 GB ATA drives, with a Pioneer DVR-106 DVD+/-RW, fully supported. The Radeon 7000 hacked to use Quartz is great. My installation was just an upgrade too, not a full install.

For the cache enabler, I'm using PowerLogix CPU Director 1.1. The difference now with Panther is that it actually shows the 1MB cache in System Profiler too, in Jaguar it always read 0MB. The OWC 550MHz is overclocked to 600MHz, no problems at all for a year now. I have 768MB RAM.

For Firewire, I only use the stock onboard ports for my video camera, but I have tried a friend's firewire DVD burner and that worked fine.

Good luck. Panther is lot's of fun!

On Oct 27, 2003, at 6:11 PM, James S Jones wrote:

I only have display sleep enabled on my B&W. I've always found sleep much too much trouble to bother with except on battery powered computers.

A BIG note of thanks on the Panther report. You have a very similar set up to mine and it's great to hear you're having no problems. I also have a Adaptec 2930 SCSI card and an Iogear USB 2 / FireWire card. A couple of questions if I may.

        What cache enabler (and version) do you use?
        Do you use any FireWire drives?


--
G-List is sponsored by <http://lowendmac.com/> and...

Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
-- We have Apple Refurbished Monitors in stock!  |  & CDRWs on Sale!  |

Support Low End Mac <http://lowendmac.com/lists/support.html>

G-List list info:       <http://lowendmac.com/lists/g-list.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to