I have some questions about the following Mac which I just acquired.
B&W G3/450
128 MB RAM
SCSI card (68 pin connectors)
9GB SCSI internal IBM HD (#309170)(1) I want to add 3 x 256MB RAM modules. Is there any advantage of getting PC-133 rather than PC-100?
(2) Last year I bought the following SCSI drive to install in a PM9500.
9GB IBM UltraStar 36LP
7200RPM 6.8MS 4MB Buffer
Low Profile UltraSCSI 50 Pin
(80 to 50 adapted).Can I move this SCSI HD to the B&W G3, (presumably with a different adapter)?
If I connect my SCSI Zip and Jaz drives to the external SCSI port, will it reduce the speed of the internal HDs unacceptably?
(3) Can I add an ATA drive to this G3 that already has a SCSI drive?
(4) Do I have to make an 8GB partition to install Panther?
Any tips or suggestions will be most appreciated.
-Maaki
-- G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
