In a message dated 10/15/04 4:33:15 PM, [EMAIL PROTECTED] writes: << Just picked up an ATTO LVD/SE ultra scsi card. Not the 160 or 320 card. It has firmware version 1.6.4f according to apple profile. The card is identified as a ExpressPCIproUL2D. I am running mac os x 10.3.5. Can I boot a B&W rev 2 from this scsi card? >>
This card boots OK in my Beige, and I bought a second one for my B&W. This card is 33 MHz/64 bit, and the Beige is 33 MHz/32 bit, while the B&W is 33 MHz/64 bit. The card is definitely 32/64 compatible. However, I have found that the earlier 1.4.4u firmware is more compatible. I have modified my cards to provide both two internal and two external drive connectors. Standard is Bus 1 internal only and Bus 0 external only. A great card, but it is much better with at least the Bus 0 internal connector installed (a not too difficult job) for easier booting, and it is much more flexible with, additionally, the Bus 1 external connector installed (very difficult). -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
