Ok, this is a variation on the recently asked question "BnW psu + sawtooth mobo?"
I currently have two working AGP G4s, a 400 Sawtooth and a dual 800 Quicksilver. I recently picked up a GigE (aka Gigabit) MLB, functional condition unknown. I also have a MLB-less B & W. I'd like to put the GigE MLB into the B & W case. I've discovered the GigE' PS connector is different than either Sawtooth or QS, so I haven't tested the GigE MLB yet. So my question: with the hardware I have, how can I test the GigE MLB? Is supplying the AGP slot's 28v critical? Also, the B & W's front panel board connector cable is different from the Sawtooth/GigE, (assuming the GigE board works) will I need to source a front panel and its cable from a Sawtooth/GigE or can I mod the B & W front panel connector to work with the GigE MLB? Any other gotchas of which I ought to be aware? TIA, dan k ................................. http://macdan.n3.net/ carracho://dankephoto.dhs.org:9700 hotline://dankephoto.dhs.org:9500 ................................. -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
