John-paste this url in your browser. xlr8 has a spport
page. did you download the software before you
installed the processor? I heard you never zap a pram
with the new processor installed. Always put the old
processor in, zap then reinstall the new one. Don't
know if it works, but i read it. The xlr8 people make
it sound like even a chimp could put one in and get it
to work. i gotta believe it's something so simple. 


http://www.xlr8.com/Apple_Mac_Products/XLR8_Macintosh_Products/Mac_CPU_G4_Upgrade_ZIF_PS.html

--- Johns Maillist <[EMAIL PROTECTED]> wrote:

> 
> On Jul 8, 2005, at 10:16 PM, Johns Maillist wrote:
> 
> > OK,I need some help.
> > On my B&W G3/400. 1Gb Ram, I was trying to replace
> the stock G3  
> > with an PowerLogix G4/500 chip.
> > To do it, I was to upgrade the firmware. It is
> running X (10.3) on  
> > it, and I have tried to upgrade the firmware, with
> no luck,  
> > including trying to run Classic mode.
> > It starts to run, then says "This update if for a
> PowerMac G3 only  
> > (I was running the G3/400 chip at the time.
> > But, that is not the worse part.
> > Now, I reboot, and the Apple shows for a moment,
> and then flickers  
> > off. It is replaced by a circle with a line
> through it.
> > That is it.
> > I reset the cuda switch, reset the PRAM, and still
> no luck
> > Any ideas what I did to this bad boy?
> > John
> > -- 
> > G-List is sponsored by <http://lowendmac.com/>
> and...
> Took out the X drive.
> Hooked up my 9.2 drive.
> Put the machine on the network (I was using a
> generic Airport card in  
> X) and connected to the internet.
> Got the G3 Firmware update and ran it. It reports
> that the firmware  
> it up to date.
> Reboot in 9.2, (G3/400) all is well.
> Switch the G4/PowerLogix Chip. Reboot. No action. No
> bong.
> Reset cuda.
> Reboot. No action, no bong.
> Put the G4 back in the Beige G3, works like a champ.
> Are there some jumpers in this (PCI) G3 B&W machine
> I am not aware  
> of. Went to Lowendmac.com, nothing about pins to
> jumper.
> Ideas?
> John
> 
> 
> -- 
> G-List is sponsored by <http://lowendmac.com/>
> and...
> 
>  Small Dog Electronics    http://www.smalldog.com |
> Refurbished Drives |
>  -- We have Apple Refurbished Monitors in stock!  | 
> & CDRWs on Sale!  |
> 
>       Support Low End Mac
> <http://lowendmac.com/lists/support.html>
> 
> G-List list info:      
> <http://lowendmac.com/lists/g-list.shtml>
>   --> AOL users, remove "mailto:";
> Send list messages to: 
> <mailto:[email protected]>
> To unsubscribe, email: 
> <mailto:[EMAIL PROTECTED]>
> For digest mode, email:
> <mailto:[EMAIL PROTECTED]>
> Subscription questions:
> <mailto:[EMAIL PROTECTED]>
> Archive:
>
<http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
> 
> iPod Accessories for Less
> at 1-800-iPOD.COM
> Fast Delivery, Low Price, Good Deal
> www.1800ipod.com
> 


-- 
G-List is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
 -- We have Apple Refurbished Monitors in stock!  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-List list info:       <http://lowendmac.com/lists/g-list.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[email protected]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>

iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com

Reply via email to