This is a B & W 350 MHz rev 1, 544 MB RAM, Adaptec 2930 CU SCSI card. THE PROBLEM: OS X does not see/mount any SCSI drives.
The hard drives are a Seagate 40 GB IDE drive with OS 10.3.9 installed and a Seagate 9 GB SCSI with OS 9.2.2 and 10.3.9 installed. Until I added another SCSI hard drive the installed drives worked perfectly. Both drives would boot into all the installed systems. I checked the SCSI ID's the termination. The OS 9 install CD sees both SCSI drives and will boot into either one (OS 9 only on the Seagate 9 GB). The OS X install CD does not see any SCSI drives and will only boot to OX X on 40 GB drive. I have run disk utilities and it has found no problems on any drives. Any ideas to get this SCSI bus recognized in OS X? Thanks --glen (digest mode) -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
