On Mar 4, 4:04 am, Lawrence David Eden <lde...@comcast.net> wrote:
> I am still working on transferring from an old computer (Beige) to a
> newer 450mhz G4.
>
> I have an Encore Zif upgrade in the Beige that should also work in the G4.
>
> Does that mean that I can take the ZIF from the (I hope I have the
> terminology correct) G4 and put it in the Beige?
>
> My ZIF upgrade is 500mhz.
I overclocked my yikes 400 mhz to 450 (with a fan). I tried 500 and i
got an error on boot,
but I might try it again (resetting the inside switch and pram 3 times
- i am not sure I did this
the first time, maybe my intuition was telling me "better burn in the
450 first")
I thought that the upgrades for beige were 550 rated ? your speed
depends on the jumper settings...
If i got a 550 I was going to try it at 600, or a 500 at 533... (with
the fan which is large). I did overclock my beige and have some
success at 466 (except in warm weather - I didn't try a fan and in the
DT model there is not room for bigger heat sink).
BTW I hung the fan below the dvd by string around it.
Interested to hear your results.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
To unsubscribe from this group, send email to
g3-5-list-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
