>Recently acquired a Sonnet 800 MHz ZIF upgrade for a G3 B&W. > >I need some install/user guide type info. Searching Google and the >Sonnet support was not helpful. > >Does anyone have a link to a user guide or could someone sent a .pdf >-- provided Sonnet ever provided one. > >I do have a white jumper block that came with the upgrade and I know >Sonnet has firmware upgrades are available on their web site. > >The Apple G4 enabler is installed, so do I also need the Sonnet >firmware as well? > >I suppose I could just plug it in and see what happens , but would >like to RTFM if I can find one before it do that :) --glen >
I easily installed a similar ZIF upgrade on my B&W. "You MUST install the Sonnet software before installing your ZIF regardless of which OS is installed in your system. The Crescendo/Encore/ZIF G4 software installer installs a Power Macintosh G3 firmware patch that is critical to the operation of the processor upgrade card in your system; without the patch, it won't work. The software installer must be run under OS 8.x or 9.x. NOT Mac OS X nor Classoc Mode under OS X. One the Sonnet installation is complete, you may use any compatible Mac OS, including OS X." (quoted form the manual for the Encore/Zif upgrade.) Hope this helps. Larry --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to g3-5-list-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---