On Aug 7, 2009, at 10:41 AM, Chance Reecher wrote:
> > No, if the drive works fine outside the QS, it is definitely not the > drive. It most likely is the ATA bus inside your QS, very likely since > you mentioned having problems with cable select. There's a SLIGHT > chance it could be power problems, but that's not very likely. Try > another drive inside the QS, see if it has the same problems. Another Seagate PATA 7200.10 (500GB in lieu of the 750GB) had no problems. Anything different about the hard disk channel use on an internal mobo vrs the external FW? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to g3-5-list-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---