Had my AGP bite the dust power system or logic board Was smoking and sizzling as soon as power cord plugged in alt power supply no help.
Purchased a used AGP and swapped the drives and now not sure if it is booting up correctly VGA out is not getting signal nor is the DVI to the Apple cinema display. In old mac I had the Radeon 9800 but looks like the fan was fried not sure if I should swap out the cards and risk frying the new system or to see if I can find my original AGP display card for the VGA monitor. Any suggestions to try before swapping cards in case unit is trying to determine whether VGA vs DVI is active or if Pram or other method can be tried to startup system? Can tell some settings are changed off of old system (10.4) because the network and attached HDD/DVD on Firewire hubs are not present. Other advice? Holler back on or off-list Thanks Erik Hancock --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---