If not I would disconnect every cable and remove the PRAM battery
along with the memory. Wait 30 mins then hold down the CUDA switch
for 15 seconds then reinstall 1 stick of ram and the battery and 1
hard drive in the forward bay and go from there.
Forward bay? i don't think where the drive is installed matters,
theres only one cable in there... Also already tried the reset
procedure D:
Sorry I got kinda confused with a G4 MDD Maybe the moving the RAM
around will help you can boot 9 with 128.
JOHN CARMONNE
Yorba Linda USA
Sent from my TiBook 800
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list
To unsubscribe, reply using "remove me" as the subject.