Hi All I have a G4 Cube and PM G4 MDD both boot OS9 and I use a program to communicate data to CNC machinery. The method was always via printer or modem ports on the pre G4 machines with those ports. So the G4's have USB and I need to transfer the files via Mac to a RS232C hub connected to 8 CNC machines. The communication program has all the setup configurations, however only affords either printer or modem port. Is there any hope of making this work.
At the moment I transfer the files via floppy to a G3 PPC to send to the machines. I want to eliminate that step. John Carmonne Yorba Linda USA Sent from my MBP -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list