Hi! I just received a used (but sold as tested and working) Dual 1 GHz G4 processor module from a Quicksilver 2002. I've put it into my Quicksilver (2001 i.e. original version) and it does not boot. No chime. Nothing.
If I put the Dual 800 Mhz module in it works; everytime. Chime. Boots into Mac OS X Tiger and Gentoo Linux nicely. I tried seating the “new” dual 1 GHz modile firmly, five times so far, and thought it may be some connection problem. After the third time I found one of the pins on the connector of the module to be slightly bent. I corrected that. But so far there is no success. What else can there possibly go wrong? What else could I try? Is the PSU of a 733 single Quicksilver (that's what it originally was) any different to a Dual Quicksilver 2002? May it be a power problem? On which screw connection is the additional power line? Thanks, Andreas aka Mac User #330250 -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
