---------- Original message ---------- Subject: Re: Dead processor? Date: Sunday, 19. June 2011 From: admin <oneluc...@mac.com> To: g3-5-list@googlegroups.com > Don't know which processors are compatible, and probably mentioned or > tried, but at least reset PRAM and press down PMU (??) button for new > processors. Also, take out battery for 15 minutes and replace.
I did all that. Thanks. I removed the battery for >10 minutes, I pressed the button next to the battery (PMU button????) and I reset the PRAM (with the old processor installed and by holding Cmd-Opt-P-R) but the new processor does nothing. No chime. No PRAM zapping, no Open Firmware command prompt (Cmd-Opt- O-F). Anyway, thanks. I'll keep trying, until I finally give up and accept that the processor module is really dead. Cheers, Andreas aka Mac User #330250 -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
