On Feb 13, 2013, at 10:07 AM, Valter Prahlad wrote:
One of the suggested trick was the hair dryer one (it makes the
solders
contacts temporarily working).
In industrial heat gun is just a super hot hairdryer, and Harbor
Freight sells cheap ones for $9.99 that are hot enough to easily
reflow solder. You'd need to mask off the rest of the board with foil
and be very careful, but you can fix these broken solder joints if
you're lucky.
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list
---
You received this message because you are subscribed to the Google Groups "G-Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to g3-5-list+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
