On Wed, Feb 3, 2016 at 10:09 AM, Nikolay Aleksandrov Vazov < n.a.va...@usit.uio.no> wrote:
> Hi, Nate, > > > Yes, we are using slurmdbd here. So by controllers, if I get it right, > you mean the controller machines of each cluster which shall connect to > (share) the same slurmdbd. > Correct. > > And a last one : > > > In your github version you say about using Slurm >= 14.11. We are running > Slurm 14.03 and we shall have to recompile it. Do you mean by recompilation > that we have to recompile both server Slurm part and the client Slurm on > the submit hosts. > This is a bit tricky. If you don't need to specify multiple clusters when submitting (e.g. with `--clusters=cluster1,cluster2`) then it works like this: You will need to recompile Slurm with the patch shown on Github. You don't actually have to install this recompiled version if you don't want to, you only need to make sure that slurm-drmaa uses this recompiled version's libslurmdb.so at runtime. There are a variety of ways to do this, I list a couple in the instructions. Or if you don't mind using this modified version in place of your existing version, you can just install the modified version so that the "default" libslurmdb.so is compatible. In that case, no runtime linker tricks should be necessary. You do not have to compile slurm-drmaa against the modified version. If you *do* need multicluster submission support, you have to compile slurm-drmaa against a copy of the (unmodified) Slurm source code for access to the private headers contained within. Once done, it works the same as above - you still need to compile a modified libslurmdb.so. The version of libslurmdb.so used by slurm-drmaa at runtime is the key. In both cases, this only needs to be done on the submission host. No (controller) server modifications are necessary. > Best regards > > > Nikolay > > > > =============== > Nikolay Vazov, PhD > Department for Research Computing, University of Oslo > ------------------------------ > *From:* Nate Coraor <n...@bx.psu.edu> > *Sent:* 03 February 2016 15:56 > *To:* Nikolay Aleksandrov Vazov > *Cc:* Ganote, Carrie L; John Chilton; dannon.ba...@gmail.com; > galaxy-dev@lists.galaxyproject.org > > *Subject:* Re: Galaxy sending jobs to multiple clusters > > On Tue, Feb 2, 2016 at 9:18 AM, Nikolay Aleksandrov Vazov < > n.a.va...@usit.uio.no> wrote: > >> >> Many thanks to all of you!! >> >> >> >> Definitely Nate's approach is a better choice. We are running Slurm >> 14.03, but Nate's manual is exhaustive enough to recompile even the >> existing version. (I don't know how we can do this on a running cluster >> though :) I will most probably go for this solution. >> >> >> There is a sentence in Nate's answer I don't really understand : >> >> >> "... using `--clusters` means you have to have your controllers >> integrated using slurmdbd, ..." >> >> >> what do you mean by this, Nate? >> > > You have to run slurmdbd (it's optional) and your slurm controllers must > connect to a single slurmdbd instance. This is Slurm's accounting server. > Here's the documentation: > > http://slurm.schedmd.com/accounting.html > > The setup is relatively simple, you just need to have a MySQL (or > derivative) server for it to store records in. > > --nate > >> >> >> >> >> Carie, I don't actually get how you implemented the hack : did you >> reduplicate the >> >> >> class DRMAAJobRunner >> >> >> under a different name in drmaa.py? And where do you define every next >> cluster (controller machines)? >> >> >> Can you give me some more detalis? >> >> >> Thank you >> >> >> Nikolay >> >> >> >> >> >> >> =============== >> Nikolay Vazov, PhD >> Department for Research Computing, University of Oslo >> ------------------------------ >> *From:* Nate Coraor <n...@bx.psu.edu> >> *Sent:* 01 February 2016 17:28 >> *To:* Ganote, Carrie L >> *Cc:* John Chilton; Nikolay Aleksandrov Vazov; dannon.ba...@gmail.com; >> galaxy-dev@lists.galaxyproject.org >> >> *Subject:* Re: Galaxy sending jobs to multiple clusters >> >> Hi Nikolay, >> >> It's worth noting that using `--clusters` means you have to have your >> controllers integrated using slurmdbd, and they must share munge keys. You >> can set up separate destinations as in Carrie's example without having to >> "integrate" your controllers at the slurm level. The downside of this >> approach is that you can't have slurm automatically "balance" across >> clusters, although Slurm's algorithm for doing this with `--clusters` is >> fairly primitive. If you don't use `--clusters` you can attempt to do the >> balancing with a dynamic job destination. >> >> If you're not using slurmdbd, you may still need to share the same munge >> key across clusters to allow the slurm client lib on the Galaxy server to >> talk to both clusters. There could be ways around this if it's a problem, >> though. >> >> --nate >> >> On Mon, Feb 1, 2016 at 11:10 AM, Ganote, Carrie L <cgan...@iu.edu> wrote: >> >>> Hi Nikolay, >>> The slurm branch that John mentioned sounds great! That might be your >>> best bet. >>> I didn't get drmaa to run with multiple clusters with flags, but I did >>> 'assign' different job handlers to different destinations in the drmaa.py >>> runner in Galaxy - but that is a bit of a hacky way to do it. >>> >>> -Carrie >>> >>> From: John Chilton <jmchil...@gmail.com> >>> Date: Monday, February 1, 2016 at 11:02 AM >>> To: Nikolay Aleksandrov Vazov <n.a.va...@usit.uio.no> >>> Cc: "dannon.ba...@gmail.com" <dannon.ba...@gmail.com>, " >>> galaxy-dev@lists.galaxyproject.org" <galaxy-dev@lists.galaxyproject.org>, >>> Carrie Ganote <cgan...@iu.edu>, Nate Coraor <n...@bx.psu.edu> >>> Subject: Re: Galaxy sending jobs to multiple clusters >>> >>> Nate has a branch of slurm drmaa that allows specifying a --clusters >>> argument in the native specification this can be used to target >>> multiple hosts. >>> >>> More information can be found here: >>> >>> https://github.com/natefoo/slurm-drmaa >>> >>> Here is how Nate uses it to configure usegalaxy.org: >>> >>> >>> https://github.com/galaxyproject/usegalaxy-playbook/blob/master/templates/galaxy/usegalaxy.org/config/job_conf.xml.j2 >>> >>> I guess instead of installing slurm-drmaa for a package manager or the >>> default source - you will just need to install Nate's version. >>> >>> -John >>> >>> >>> >>> On Wed, Jan 20, 2016 at 1:18 PM, Nikolay Aleksandrov Vazov >>> <n.a.va...@usit.uio.no> wrote: >>> >>> Hi, John, Dan, Carrie and all others, >>> >>> >>> I am considering a task of setting up a Galaxy instance which shall send >>> jobs to more than on cluster at a time. In my case I am using >>> drmaa-python >>> and I was wondering if it was possible to configure multiple drmaa >>> runners >>> each "pointing" at a different (slurm) control host, e.g. >>> >>> >>> local >>> >>> drmaa1 >>> >>> drmaa2 >>> >>> >>> Thanks a lot for your advice >>> >>> >>> Nikolay >>> >>> >>> >>> >>> =============== >>> Nikolay Vazov, PhD >>> Department for Research Computing, University of Oslo >>> >>> >>> >> >
___________________________________________________________ Please keep all replies on the list by using "reply all" in your mail client. To manage your subscriptions to this and other Galaxy lists, please use the interface at: https://lists.galaxyproject.org/ To search Galaxy mailing lists use the unified search at: http://galaxyproject.org/search/mailinglists/
