No need it is included in gamba2-gb-db. I have had a similar problem with the SDL component.
if you are installing and have a dependency problem. Make sure that the above and all other required files are installed. Then run from a cmd prompt su rpm -ivh --nodeps 'the-name-of-your-rpm' if you like send me the program I can test further for you. Steven. On Sun, 2009-06-21 at 19:27 -0700, Swee Kwang Tan wrote: > Dear Sir, > I've upgrade my system from ubuntu8.04 to fedora 11, after intall the > gambas2-2.13.1, I found that my program can't run on the latest gambas > version, because the gambas2-gb-db-postgresql is missing, my program > can run in ubuntu 8.04 normally, I wish to download the missing package, but > where is the package wed site ? > Thank you. > > > > > > ________________________________ > From: "gambas-user-requ...@lists.sourceforge.net" > <gambas-user-requ...@lists.sourceforge.net> > To: gambas-user@lists.sourceforge.net > Sent: Saturday, June 20, 2009 6:44:21 PM > Subject: Gambas-user Digest, Vol 37, Issue 29 > > Send Gambas-user mailing list submissions to > gambas-user@lists.sourceforge.net > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/gambas-user > or, via email, send a message with subject or body 'help' to > gambas-user-requ...@lists.sourceforge.net > > You can reach the person managing the list at > gambas-user-ow...@lists.sourceforge.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Gambas-user digest..." > > > Today's Topics: > > 1. Re: build 2027 failing (Zach Smith) > 2. Re: showdialog / showmodal auto center (kobolds) > 3. Re: build 2027 failing (Beno?t Minisini) > 4. GTK TRISTATE CHECKBOX NO POSSIBLE TO SET TO THREE DIFFERENTS > STATES (Ricardo D?az Mart?n) > 5. Please help me!!! (Swee Kwang Tan) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 19 Jun 2009 19:29:09 -0500 > From: Zach Smith <zachsmith...@gmail.com> > Subject: Re: [Gambas-user] build 2027 failing > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: > <add8d80a0906191729u6a9bbde4i5c3c394fca746...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Thanks Benoit, Laurent. 32 bit (desktop) works now but... 64 bit > (laptop) still won't build, Arch, gcc 4.4.0-3, #2030 now gives me: > > make[5]: Entering directory `/home/craig/gambas3/src/trunk/gb.qt4/src/ext' > /bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H > -I. -I../.. -DQT3_SUPPORT -DQT_SHARED -DQT3_SUPPORT > -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include/Qt3Support > -I/usr/include/QtNetwork -I/usr/include/QtSql -I../../share > -I../../src/share -pipe -Wall -fno-exceptions -Wno-unused-value > -fsigned-char -fvisibility=hidden -g -Os -fno-omit-frame-pointer -MT > CDial_moc.lo -MD -MP -MF .deps/CDial_moc.Tpo -c -o CDial_moc.lo > CDial_moc.cpp > g++ -DHAVE_CONFIG_H -I. -I../.. -DQT3_SUPPORT -DQT_SHARED > -DQT3_SUPPORT -I/usr/include/QtCore -I/usr/include/QtGui > -I/usr/include/Qt3Support -I/usr/include/QtNetwork > -I/usr/include/QtSql -I../../share -I../../src/share -pipe -Wall > -fno-exceptions -Wno-unused-value -fsigned-char -fvisibility=hidden -g > -Os -fno-omit-frame-pointer -MT CDial_moc.lo -MD -MP -MF > .deps/CDial_moc.Tpo -c CDial_moc.cpp -fPIC -DPIC -o .libs/CDial_moc.o > CDial_moc.cpp:14:2: error: #error "This file was generated using the > moc from 4.4.3. It" > CDial_moc.cpp:15:2: error: #error "cannot be used with the include > files from this version of Qt." > CDial_moc.cpp:16:2: error: #error "(The moc has changed too much.)" > make[5]: *** [CDial_moc.lo] Error 1 > > > > ------------------------------ > > Message: 2 > Date: Fri, 19 Jun 2009 22:13:36 -0700 (PDT) > From: kobolds <kobo...@singnet.com.sg> > Subject: Re: [Gambas-user] showdialog / showmodal auto center > To: gambas-user@lists.sourceforge.net > Message-ID: <24122180.p...@talk..nabble.com> > Content-Type: text/plain; charset=UTF-8 > > > > > Beno?t Minisini wrote: > > > >> i found that when display a window using showdialog / showmodal , the > >> window show with auto center on screen. i don't want that , how do i > >> disable it. i try using the X and Y but no effect > > > > Why don't you want that? > > > > -- > > Beno?t > > > > ------------------------------------------------------------------------------ > > Crystal Reports - New Free Runtime and 30 Day Trial > > Check out the new simplified licensing option that enables unlimited > > royalty-free distribution of the report engine for externally facing > > server and web deployment. > > http://p.sf.net/sfu/businessobjects > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > > why would I need that for . if I want to make it center , I can do it from > the code . > the current showmodal/show dialog not only auto center also prevent to > change the position from the code . > > anyone know how to solve this problem ? > > -- > View this message in context: > http://www.nabble.com/showdialog---showmodal-auto-center-tp24105720p24122180.html > Sent from the gambas-user mailing list archive at Nabble..com. > > > > > ------------------------------ > > Message: 3 > Date: Sat, 20 Jun 2009 11:02:52 +0200 > From: Beno?t Minisini <gam...@users.sourceforge.net> > Subject: Re: [Gambas-user] build 2027 failing > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: <200906201102.52552.gam...@users.sourceforge.net> > Content-Type: Text/Plain; charset="iso-8859-1" > > > Thanks Benoit, Laurent. 32 bit (desktop) works now but... 64 bit > > (laptop) still won't build, Arch, gcc 4.4.0-3, #2030 now gives me: > > > > make[5]: Entering directory `/home/craig/gambas3/src/trunk/gb.qt4/src/ext' > > /bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H > > -I. -I../.. -DQT3_SUPPORT -DQT_SHARED -DQT3_SUPPORT > > -I/usr/include/QtCore -I/usr/include/QtGui -I/usr/include/Qt3Support > > -I/usr/include/QtNetwork -I/usr/include/QtSql -I../../share > > -I../../src/share -pipe -Wall -fno-exceptions -Wno-unused-value > > -fsigned-char -fvisibility=hidden -g -Os -fno-omit-frame-pointer -MT > > CDial_moc.lo -MD -MP -MF .deps/CDial_moc.Tpo -c -o CDial_moc.lo > > CDial_moc.cpp > > g++ -DHAVE_CONFIG_H -I. -I../.. -DQT3_SUPPORT -DQT_SHARED > > -DQT3_SUPPORT -I/usr/include/QtCore -I/usr/include/QtGui > > -I/usr/include/Qt3Support -I/usr/include/QtNetwork > > -I/usr/include/QtSql -I../../share -I.../../src/share -pipe -Wall > > -fno-exceptions -Wno-unused-value -fsigned-char -fvisibility=hidden -g > > -Os -fno-omit-frame-pointer -MT CDial_moc.lo -MD -MP -MF > > .deps/CDial_moc.Tpo -c CDial_moc.cpp -fPIC -DPIC -o .libs/CDial_moc.o > > CDial_moc.cpp:14:2: error: #error "This file was generated using the > > moc from 4.4.3. It" > > CDial_moc.cpp:15:2: error: #error "cannot be used with the include > > files from this version of Qt." > > CDial_moc.cpp:16:2: error: #error "(The moc has changed too much.)" > > make[5]: *** [CDial_moc.lo] Error 1 > > > > Do a "make clean" inside the gb.qt4 directory: apparently you have already > compiled Gambas and changed your version of qt 4 since. > > Regards, > > -- > Beno?t > > > > ------------------------------ > > Message: 4 > Date: Sat, 20 Jun 2009 12:28:05 +0200 > From: Ricardo D?az Mart?n <oceanosoftlapa...@gmail.com> > Subject: [Gambas-user] GTK TRISTATE CHECKBOX NO POSSIBLE TO SET TO > THREE DIFFERENTS STATES > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: <4a3cb9b5.7050...@gmail.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi, > > The checkbox control in gtk is no possible to change to other states y > you select CheckBox.None as default value. There's all ok if you use the > same code with qt component. > > Somebody knows if is it a bug or a GTK limitation? > > To reproduce this, it isn't necessary to write code: only put a checkbox > in a empty form a run. > > I'm using gambas2 r.2028 in ubuntu 9.04x86_64 > > Regards, > Ricardo D?az > > > > ------------------------------ > > Message: 5 > Date: Sat, 20 Jun 2009 03:44:16 -0700 (PDT) > From: Swee Kwang Tan <sktan...@yahoo.com> > Subject: [Gambas-user] Please help me!!! > To: gambas-user@lists.sourceforge.net > Message-ID: <714099.82128...@web43506.mail.sp1.yahoo.com> > Content-Type: text/plain; charset=utf-8 > > Dear Sir, > Gambas is good software, thank you for your working. > I've upgrade my system from ubuntu 8.04 to fedora 11, and get the latest > gambas2-2.13.1 from fedora repo. But my gambas program can't work normally, > although it can work noraml in ubuntu, the postgresql can't connect, because > fedora > 11 repo have'nt gambas-db-postgresql-2.13.1-1.fc11 (i586). So it cause the > following error message. > (InputKuaDef:2963): IBUS-WARNING **: Connect to > unix:path=/tmp/ibus-program/ibus-unix-0 failed: Failed to connect to socket > /tmp/ibus-program/ibus-unix-0: refuse > connection > (InputKuaDef:2963): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: > assertion `atom != GDK_NONE' failed > (InputKuaDef:2963): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: > assertion `atom != GDK_NONE' failed > The "InputKuaDef" is my program name. How can I do now ? > > > > > > ________________________________ > From: "gambas-user-requ...@lists.sourceforge.net" > <gambas-user-requ...@lists.sourceforge.net> > To: gambas-user@lists.sourceforge.net > Sent: Friday, June 19, 2009 7:03:00 PM > Subject: Gambas-user Digest, Vol 37, Issue 27 > > Send Gambas-user mailing list submissions to > gambas-user@lists.sourceforge.net > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/gambas-user > or, via email, send a message with subject or body 'help' to > gambas-user-requ...@lists.sourceforge.net > > You can reach the person managing the list at > gambas-user-ow...@lists.sourceforge.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Gambas-user digest..." > > > Today's Topics: > > 1. build 2027 failing (Zach Smith) > 2. Re: v4l - can not open device -solved (Steven James Drinnan) > 3. showdialog / showmodal auto center (kobolds) > 4. Re: gbr2 crash at different points (Andreas Fr?hlke) > 5.. Re: Database example (charlesg) > 6. Re: showdialog / showmodal auto center (Beno?t Minisini) > 7. Re: build 2027 failing (Beno?t Minisini) > 8. Re: v4l - can not open device -solved (Beno?t Minisini) > 9. Re: build 2026 failing (Beno?t Minisini) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 18 Jun 2009 19:37:44 -0500 > From: Zach Smith <zachsmith...@gmail.com> > Subject: [Gambas-user] build 2027 failing > To: gambas-user@lists.sourceforge.net > Message-ID: > <add8d80a0906181737p710e51fan469bf6ecb49c1...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > gambas3, build 2027, x_64, arch > > I'm getting: > > make[4]: Entering directory `/home/craig/gambas3/src/trunk/gb.db.sqlite3/src' > /bin/sh ../libtool? --tag=CXX?? --mode=compile g++ -DHAVE_CONFIG_H -I. > -I..??? -pipe -Wall -fno-exceptions -Wno-unused-value -fsigned-char > -fvisibility=hidden -g -Os -fno-omit-frame-pointer -fexceptions? -MT > gb_db_sqlite3_la-main.lo -MD -MP -MF .deps/gb_db_sqlite3_la-main.Tpo > -c -o gb_db_sqlite3_la-main.lo `test -f 'main.cpp' || echo > './'`main.cpp > ?g++ -DHAVE_CONFIG_H -I. -I.. -pipe -Wall -fno-exceptions > -Wno-unused-value -fsigned-char -fvisibility=hidden -g -Os > -fno-omit-frame-pointer -fexceptions -MT gb_db_sqlite3_la-main..lo -MD > -MP -MF .deps/gb_db_sqlite3_la-main.Tpo -c main.cpp? -fPIC -DPIC -o > .libs/gb_db_sqlite3_la-main.o > main.cpp: In function 'int field_index(void*, const char*, DB_DATABASE*)': > main.cpp:1011: error: invalid conversion from 'const char*' to 'char*' > make[4]: *** [gb_db_sqlite3_la-main.lo] Error 1 > > > > ------------------------------ > > Message: 2 > Date: Fri, 19 Jun 2009 12:26:05 +0800 > From: Steven James Drinnan <ste...@sjdsoft.hk> > Subject: Re: [Gambas-user] v4l - can not open device -solved > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: <1245385566.3344.3.ca...@laptop.myhome> > Content-Type: text/plain; charset="UTF-8" > > Had another look, looks like /dev/video is no longer created in v4l so > the default now is /dev/video0. > > I know you did not make this component. But does need to be updated to > recognize v4l2 which is now the default in most major distributions. > > Many thanks for your patience. > > Steven > > On Fri, 2009-06-19 at 00:30 +0200, Beno?t Minisini wrote: > > > Have you have had a chance to check it out? > > > > > > > I have no webcam, nor any v4l device, and I didn't make the component, so > > it > > is hard for me to help you... > > > > Try to open the device with an OPEN "xxxx" FOR READ WRITE instruction to > > see > > if you get a more detailed error message. > > > > Regards, > > > > > > > ------------------------------ > > Message: 3 > Date: Thu, 18 Jun 2009 22:27:38 -0700 (PDT) > From: kobolds <kobo...@singnet.com.sg> > Subject: [Gambas-user] showdialog / showmodal auto center > To: gambas-user@lists.sourceforge.net > Message-ID: <24105720.p...@talk.nabble.com> > Content-Type: text/plain; charset=us-ascii > > > i found that when display a window using showdialog / showmodal , the window > show with auto center on screen. i don't want that , how do i disable it. i > try using the X and Y but no effect > -- > View this message in context: > http://www.nabble.com/showdialog---showmodal-auto-center-tp24105720p24105720.html > Sent from the gambas-user mailing list archive at Nabble.com. > > > > > ------------------------------ > > Message: 4 > Date: Fri, 19 Jun 2009 09:23:54 +0200 > From: Andreas Fr?hlke <afroeh...@kikxxl.de> > Subject: Re: [Gambas-user] gbr2 crash at different points > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: > <8d42310d957cfb46aa11921a711d4d160245aac...@x2007.kikxxl.local> > Content-Type: text/plain; charset="iso-8859-1" > > Hello, > > just wanna know, do you get the mail? > > Regards > > Andreas Fr?hlke > > -----Urspr?ngliche Nachricht----- > Von: Beno?t Minisini [mailto:gam...@users..sourceforge.net] > Gesendet: Mittwoch, 17. Juni 2009 12:42 > An: mailing list for gambas users > Betreff: Re: [Gambas-user] gbr2 crash at different points > > > Hello, > > > > we used to send you an core dump created with gcore, but the admin of the > > mailinglist blocked it, because it is bigger than 256k. > > > > Regards > > > > A.Fr?hlke > > > > This is automatic - Every 500+ subscribers will receive your mail, so it > can't > be big! Send the mail to my private e-mail (gam...@users.sf.net) > > Regards, > > -- > Beno?t > > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensing option that enables unlimited > royalty-free distribution of the report engine for externally facing > server and web deployment. > http://p.sf.net/sfu/businessobjects > _______________________________________________ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > > > > > ------------------------------ > > Message: 5 > Date: Fri, 19 Jun 2009 02:03:06 -0700 (PDT) > From: charlesg <char...@pearceshardware.co.uk> > Subject: Re: [Gambas-user] Database example > To: gambas-user@lists.sourceforge.net > Message-ID: <24107894.p...@talk.nabble.com> > Content-Type: text/plain; charset=us-ascii > > > Hi > > Thank you Ron for that. A bit more messing around and I think I now > understand it. > > Following on from richard terry's suggestion for simple examples, here it is > as simple as I can get it. There is nothing new here: it all comes from the > database example. Any corrections to the annotations welcome! > > You just need a gridview, a button called btnRun and a preferably large > database with lots of columns so that you can scroll around with ease > > '======================================================== > ' Gambas class file > PUBLIC $hConnLocl AS NEW Connection > PUBLIC $resData AS Result > '-------------------------------------------------------- > PUBLIC SUB Form_Open() > DIM sql AS String > > 'open the database > WITH $hConnLocl > .type = "mysql" > .host = "localhost" > .Name = "stock" > .login = "charles" > .password="dog" > END WITH > $hConnLocl.Open() > > 'create a result > sql = "SELECT * FROM grnLine" > $resData = $hConnLocl.Exec(sql) > END > '--------------------------------------------------------- > PUBLIC SUB btnRun_Click() > DIM hForm AS FRequest > DIM hField AS ResultField > DIM iInd AS Integer > > GridView1.Rows.count = 0 > 'set the required number of columns > GridView1.Columns.count = $resData.Fields.Count > > 'define the column headers and width > FOR EACH hField IN $resData.Fields > WITH hField > GridView1.Columns[iInd].text = .Name > GridView1.Columns[iInd].width = 60 > END WITH > INC iInd > NEXT > > 'create the empty rows. Each empty and visible cell created calls > GridView1_data > GridView1.Rows.Count = $resData.Count > END > '--------------------------------------------------------- > PUBLIC SUB GridView1_Data(Row AS Integer, Column AS Integer) > 'move to the required result row > $resData.MoveTo(row) > 'set the data for the cell in the GridView from the column in the selected > row of the result > GridView1.Data.text = Str($resData[GridView1.Columns[column].text]) > 'lets you see how _data is being called as you scroll around the GridView > PRINT row & ":" & column & ":" & > Str($resData[GridView1..Columns[column].text]) > END > '---------------------------------------------------------- > > I also created a second small form. As you move the second form around on > top of the gridview, the print command still shows the _Data frantically > working in the background. Clever things these computers! > > rgds > -- > View this message in context: > http://www.nabble.com/Database-example-tp24021356p24107894.html > Sent from the gambas-user mailing list archive at Nabble.com. > > > > > ------------------------------ > > Message: 6 > Date: Fri, 19 Jun 2009 12:52:59 +0200 > From: Beno?t Minisini <gam...@users.sourceforge.net> > Subject: Re: [Gambas-user] showdialog / showmodal auto center > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: <200906191252.59641.gam...@users.sourceforge.net> > Content-Type: Text/Plain; charset="iso-8859-1" > > > i found that when display a window using showdialog / showmodal , the > > window show with auto center on screen. i don't want that , how do i > > disable it.. i try using the X and Y but no effect > > Why don't you want that? > > -- > Beno?t > > > > ------------------------------ > > Message: 7 > Date: Fri, 19 Jun 2009 12:53:56 +0200 > From: Beno?t Minisini <gam...@users.sourceforge.net> > Subject: Re: [Gambas-user] build 2027 failing > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: <200906191253.56345.gam...@users.sourceforge.net> > Content-Type: Text/Plain; charset="iso-8859-1" > > > gambas3, build 2027, x_64, arch > > > > I'm getting: > > > > make[4]: Entering directory > > `/home/craig/gambas3/src/trunk/gb.db.sqlite3/src' /bin/sh ../libtool > > --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -pipe -Wall > > -fno-exceptions -Wno-unused-value -fsigned-char -fvisibility=hidden -g -Os > > -fno-omit-frame-pointer -fexceptions -MT gb_db_sqlite3_la-main.lo -MD -MP > > -MF ..deps/gb_db_sqlite3_la-main.Tpo -c -o gb_db_sqlite3_la-main.lo `test -f > > 'main.cpp' || echo > > './'`main.cpp > > g++ -DHAVE_CONFIG_H -I. -I.. -pipe -Wall -fno-exceptions > > -Wno-unused-value -fsigned-char -fvisibility=hidden -g -Os > > -fno-omit-frame-pointer -fexceptions -MT gb_db_sqlite3_la-main.lo -MD > > -MP -MF .deps/gb_db_sqlite3_la-main.Tpo -c main.cpp -fPIC -DPIC -o > > .libs/gb_db_sqlite3_la-main.o > > main.cpp: In function 'int field_index(void*, const char*, DB_DATABASE*)': > > main.cpp:1011: error: invalid conversion from 'const char*' to 'char*' > > make[4]: *** [gb_db_sqlite3_la-main.lo] Error 1 > > > > --------------------------------------------------------------------------- > >--- Crystal Reports - New Free Runtime and 30 Day Trial > > Check out the new simplified licensing option that enables unlimited > > royalty-free distribution of the report engine for externally facing > > server and web deployment. > > http://p.sf.net/sfu/businessobjects > > _______________________________________________ > > Gambas-user mailing list > > Gambas-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/gambas-user > > Which distribution do you use? Which version of gcc? > > -- > Beno?t > > > > ------------------------------ > > Message: 8 > Date: Fri, 19 Jun 2009 12:55:57 +0200 > From: Beno?t Minisini <gam...@users.sourceforge.net> > Subject: Re: [Gambas-user] v4l - can not open device -solved > To: mailing list for gambas users <gambas-user@lists.sourceforge.net> > Message-ID: <200906191255.57135.gam...@users.sourceforge.net> > Content-Type: Text/Plain; charset="iso-8859-1" > > > Had another look, looks like /dev/video is no longer created in v4l so > > the default now is /dev/video0. > > > > I know you did not make this component. But does need to be updated to > > recognize v4l2 which is now the default in most major distributions. > > > > Many thanks for your patience. > > > > Steven > > > > gb.v4l uses v4l2 but only in the development version. > > Regards, > > -- > Beno?t > > > > ------------------------------ > > Message: 9 > Date: Fri, 19 Jun 2009 13:02:49 +0200 > From: Beno?t Minisini <gam...@users.sourceforge.net> > Subject: Re: [Gambas-user] build 2026 failing > To: richard terry <rte...@pacific.net.au>, mailing list for gambas > users <gambas-user@lists.sourceforge.net> > Message-ID: <200906191302.49657.gam...@users.sourceforge.net> > Content-Type: Text/Plain; charset="utf-8" > > > On Fri, 19 Jun 2009 09:48:08 am Beno?t Minisini wrote: > > > > gambas3, build 2026, x_64, arch > > > > > > > > I'm getting: > > > > > > > > make[4]: Entering directory `/home/test/gambas3/src/trunk/main/gbx' > > > > gcc -DHAVE_CONFIG_H -I. -I.. -I../share -D_REENTRANT -I.../libltdl > > > > -I/usr/lib/libffi-3.0.8/include > > > > -DGAMBAS_PATH="\"/home/test/gambas3/pkg/usr/bin\"" -pipe -Wall > > > > -Wno-unused-value -fsigned-char -fvisibility=hidden -g -Os -MT > > > > gbx3-gbx_debug.o -MD -MP -MF .deps/gbx3-gbx_debug.Tpo -c -o > > > > gbx3-gbx_debug.o `test -f 'gbx_debug.c' || echo './'`gbx_debug.c > > > > In file included from gbx_class..h:30, > > > > from gbx_exec.h:31, > > > > from gbx_debug.c:35: > > > > gbx_class_desc.h:105: error: duplicate member ?_reserved? > > > > gbx_class_desc.h:123: error: duplicate member ?_reserved? > > > > In file included from gbx_exec.h:38, > > > > from gbx_debug.c:35: > > > > gbx_variant.h: In function ?VARIANT_free?: > > > > gbx_variant.h:55: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h:55: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h:55: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h:55: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h: In function ?VARIANT_keep?: > > > > gbx_variant.h:63: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h:67: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h:67: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h: In function ?VARIANT_is_null?: > > > > gbx_variant.h:76: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h:79: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > gbx_variant.h: In function ?VARIANT_clear?: > > > > gbx_variant.h:90: warning: dereferencing type-punned pointer will break > > > > strict-aliasing rules > > > > make[4]: *** [gbx3-gbx_debug.o] Error 1 > > > > > > Fixed in revision #2027 ! > > > > CEditor.cpp: In function 'void CEDITOR_show_word(void*, void*)': > > CEditor.cpp:962: error: 'class GEditor' has no member named 'showWord' > > make[5]: *** [CEditor.lo] Error 1 > > make[5]: Leaving directory > > `/home/richard/gambas3-svn/src/trunk/gb.qt4/src/ext' > > make[4]: *** [all-recursive] Error 1 > > make[4]: Leaving directory `/home/richard/gambas3-svn/src/trunk/gb..qt4/src' > > make[3]: *** [all-recursive] Error 1 > > make[3]: Leaving directory `/home/richard/gambas3-svn/src/trunk/gb.qt4' > > make[2]: *** [all] Error 2 > > make[2]: Leaving directory `/home/richard/gambas3-svn/src/trunk/gb.qt4' > > make[1]: *** [all-recursive] Error 1 > > make[1]: Leaving directory `/home/richard/gambas3-svn/src/trunk' > > make: *** [all] Error 2 > > ==> ERROR: Build Failed. > > > > something not right on my machine in 2027 > > > > Fixed in revision #2028. Nothing is wrong on your machine, I just sometimes > break the development version inadvertently. > > Regards, > > -- > Beno?t > > > > ------------------------------ > > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensing option that enables unlimited > royalty-free distribution of the report engine for externally facing > server and web deployment.. > http://p.sf.net/sfu/businessobjects > > ------------------------------ > > _______________________________________________ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > End of Gambas-user Digest, Vol 37, Issue 27 > ******************************************* > > > _______________________________________ > ???????????? > http://cn.mail.yahoo.com > > ------------------------------ > > ------------------------------------------------------------------------------ > Are you an open source citizen? Join us for the Open Source Bridge conference! > Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. > Need another reason to go? 24-hour hacker lounge. Register today! > http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org > > ------------------------------ > > _______________________________________________ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user > > > End of Gambas-user Digest, Vol 37, Issue 29 > ******************************************* > > > _______________________________________ > 辣茩妏蚚閉湮⺍講捇誥蚘眊 > http://cn.mail.yahoo.com > ------------------------------------------------------------------------------ > Are you an open source citizen? Join us for the Open Source Bridge conference! > Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. > Need another reason to go? 24-hour hacker lounge. Register today! > http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org > _______________________________________________ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user ------------------------------------------------------------------------------ Are you an open source citizen? Join us for the Open Source Bridge conference! Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. Need another reason to go? 24-hour hacker lounge. Register today! http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
