Am Mittwoch, den 02.12.2009, 20:25 +1100 schrieb Tony: > Hi Benoit, > I have muddled my way through the subversion bit, hopefully correctly and > compiled the 2454 version. When opening my application I get the error > message "The program has stopped unexpectedly raising signal #11" with the > CPU at 100%. If I try to open the wrong ttyUSBx, the application flags this > error and behaves correctly, so I would assume that if the ttyUSBx opens OK > then the most recent Gambas2 changes have induced the "signal #11" problem. > Can you please let me know how to debug further and assist you with your > efforts. > Thanks and regards, > Tony.. > Benoît Minisini wrote: > > Thanks Benoit and all for your speedy replies.. > I'm using the serial port in a timing application with 3 laser through > beam sensors feeding into the CTS, RI and DSR lines of the serial port. In > this mode I don't pass any data, don't really care about flow control and > am only interested in the raw status change events. Working this way I > haven't noticed gross CPU utilisation after opening the port. The > application also uses the UDPsocket to communicate remotely and what I > have noticed is that if the serial port does not open correctly e.g. > "/dev/tty" wrong and the UDPsocket is open, then there is a large amount > of CPU used. Both open correctly and CPU normal. > Can you tell me the polling frequency in Gambas2 2.8 ? > I would assume that there ore other users of Gambas2 who are using the > serial port as a convenient way of passing external events to the > application, so maybe some input from them would also be in order. As > long as there is a mechanism to replicate the Gambas2 2.8 functionality > that I currently use, I'll leave the implementation up to those who know a > lot more than myself. If going back to polling, a property to define the > frequency would be nice. > Thanks again, > Tony. > > > Can you try the revision #2454? I think I have found and fix another possible > bug, and I'd like to be sure I didn't break anything. > > Regards,
Salut Tony, you will find how to work with gdb there : go to http://gambas.sourceforge.net/en/main.html click: Reporting a problem read : 3. Reporting a crash (a segmentation fault, or a signal #11) -- Amicalement Charlie ------------------------------------------------------------------------------ Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev _______________________________________________ Gambas-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gambas-user
