Benoît Minisini schreef: > It should be ok with revision #2456! > > If it really works, can you check that changing the flow control between None > and something else actually has an effect on CPU consumption? > > Benoît,
no segfaults, but the system load when running my project with the patch is alot higher than before. Before it was 0.2-0.3 Now it's 1.0-1.10 I'm not using flowcontrol. $ grep FlowControl * CCTX35.class: .FlowControl = 0 CGPS.class: .FlowControl = 0 CPlugwise.class: .FlowControl = 0 CRFXComRX.class: .FlowControl = 0 CRFXComTX.class: .FlowControl = 0 CSMS.class: .FlowControl = 0 CVISCA.class: .FlowControl = 0 CWeeder.class: .FlowControl = 0 CZWave.class: .FlowControl = 0 Six of these serialports are active. And I presume 0 is the same as None. Regards, Ron_2nd. ------------------------------------------------------------------------------ Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev _______________________________________________ Gambas-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gambas-user
