> 2009/12/3 Benoît Minisini <gam...@users.sourceforge.net>: > >> This happens in both Gambas 2.18 and 3. > >> > >> When I drag a hSplit or a vSplit onto a form, I can't add any controls > >> to either the left or the right panel because the splitter is not > >> functioning. > >> > >> Anyone got any suggestions? > > > > I'm not sure to really understand what you are talking about there... > > Oh. I thought it was clear with the image I attached to the first > post. I'll try again. > > Either I am missing some fundamental point about hSplit and vSplit or > something is wrong. > > There is no sign of a splitter in the design environment on either h > or vsplit so there is no way for me decide if I want to place controls > to the left or right of the splitter bar on a hsplit, or above or > below the splitter bar on a vsplit. > > There is no splitter bar. There are no left and right panels and no > top and bottom panels. No splitter bar. > > Does the attached image of two splitter controls look right to you? If > so, how do you add a control on the left of the splitter and one on > the right? >
Ok! Just put some controls inside the H/VSlider, and at run time it will display it from left to right (or top to bottom) with sliders between them. Regards, -- Benoît Minisini ------------------------------------------------------------------------------ Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev _______________________________________________ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user