> Firmware is v1.44.3 (Dec 2002) > However, Linksys website shows that v1.44 (Nov 2002) is their current > version. > > When I try to create a tunnel based on the current IP address of the BEFSX41 > and the GB-1000 (ie as per static to static arrangement) the BEFSX41 locks > up and you need to cycle the power to get it going again...very annoying and > frustrating. > > Probably a firmware problem - I will try downgrading the firmware to 1.44
Hmmm, the 1.44.3 is what I had success with. I did notice that when making certain changes, the unit sometimes stopped responding for a while. However, since I was 3000 or so miles away from it, I couldn't really cycle power, so I just closed the browser window and did something else for a few minutes. It always "came back" without requiring manual intervention. I'd suggest setting up the tunnel per my previous post, and whenever you get a "lock up", just be patient and see what happens. -- Alex Howansky Wankwood Associates http://www.wankwood.com/ --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[EMAIL PROTECTED]
