No ideas at all!! -----Original Message----- From: Curtis Muncy Sent: Friday, November 21, 2003 12:26 AM To: [EMAIL PROTECTED] Subject: [gb-users] VPN to remote network with DMZ
Setting up a VPN, have a single network at my end behind a GB-1000, need to connect to a Firebox that has a protected network and a DMZ, therefore I need to be able to get to two networks through the single VPN. The Firebox on the other end is handling all the routing between the protected and DMZ network. I created an object and placed both network definitions in it, then used this object to define the remote network in the VPN authorization and the pass through filters. I can get to the protected, but not the DMZ. Has anyone been able to route to two different networks like this? This seems like it would be a common tasks. Any help would be appreciated. Curtis Muncy Senior IT Manager, Catapult Systems ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/ ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
