Between two Gnatboxes, no problem. ;-) Johan
On 24 Nov 2003 at 13:36, Curtis Muncy wrote: > > **************************************************************************** > This e-mail has been scanned by http://www.comendo.com and does not contain virus. > **************************************************************************** > No ideas at all!! > > -----Original Message----- > From: Curtis Muncy > Sent: Friday, November 21, 2003 12:26 AM > To: [EMAIL PROTECTED] > Subject: [gb-users] VPN to remote network with DMZ > > > Setting up a VPN, have a single network at my end behind a GB-1000, need > to connect to a Firebox that has a protected network and a DMZ, > therefore I need to be able to get to two networks through the single > VPN. The Firebox on the other end is handling all the routing between > the protected and DMZ network. I created an object and placed both > network definitions in it, then used this object to define the remote > network in the VPN authorization and the pass through filters. I can get > to the protected, but not the DMZ. Has anyone been able to route to two > different networks like this? This seems like it would be a common > tasks. Any help would be appreciated. > > Curtis Muncy > Senior IT Manager, Catapult Systems > > > ------------------------------------------------------ > To unsubscribe: [EMAIL PROTECTED] > For additional commands: [EMAIL PROTECTED] > Archive: http://archives.gnatbox.com/gb-users/ > > ------------------------------------------------------ > To unsubscribe: [EMAIL PROTECTED] > For additional commands: [EMAIL PROTECTED] > Archive: http://archives.gnatbox.com/gb-users/ ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
