I am setting up a static-static VPN for the first time. In fact, this is my first attempt at setting up any kind of VPN with GB. At my end I am using GB-Ware 3.5.1 and the other end has a Linksys router of some kind.
I believe that I have the VPN set up properly as I can see it being established on the Active VPNs page of the web interface. However, in trying to ping the remote host at the other end of the VPN, I do get replies. In reviewing my logs, I see the message: "Possible spoof, return interface doesn't match arrival interface" which seems to be referring to the icmp traffic returning to me from the remote host. This probably explains why I am not getting my ping replies, but I don't understand what might be wrong with my configuration. The other odd thing I have noticed is that my remote access filter for the AH protocol and my inbound IP pass-through filter are not showing any hits from the remote traffic. I would have expected to see some hits on these filters because the VPN is showing up as active. If you have any suggestions, I would love to hear them. Thanks very much. John -- John Rumball, CCNA - Network Analyst Information Technology Department - Sudbury Regional Hospital (Laurentian Site) E-mail: [EMAIL PROTECTED] - Phone: (705)522-2200 Ext. 3911 *************************************************************** The information contained in this email and document(s) attached are for the exclusive use of the addressee and may contain confidential, privileged and non-disclosable information. If the recipient of this e-mail is not the addressee, such recipient is strictly prohibited from reading, photocopying, distributing or otherwise using this e-mail or its content in any way. ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
