On Tue, 2 Jul 2019 at 16:59, Richard Sandiford
<richard.sandif...@arm.com> wrote:
>
> Thanks for fixing this.
>
> Prathamesh Kulkarni <prathamesh.kulka...@linaro.org> writes:
> > diff --git a/gcc/simplify-rtx.c b/gcc/simplify-rtx.c
> > index 89a46a933fa..79bd0cfbd28 100644
> > --- a/gcc/simplify-rtx.c
> > +++ b/gcc/simplify-rtx.c
> > @@ -6697,6 +6697,19 @@ simplify_subreg (machine_mode outermode, rtx op,
> > }
> > }
> >
> > + /* If op is a vector comparison operator, rewrite it in a new mode.
> > + This probably won't match, but may allow further simplifications.
> > + Also check if number of elements and size of each element
> > + match for outermode and innermode. */
> > +
>
> Excess blank line after the comment. IMO the second part of the comment
> reads too much like an afterthought. How about:
>
> /* If OP is a vector comparison and the subreg is not changing the
> number of elements or the size of the elements, change the result
> of the comparison to the new mode. */
>
> > + if (COMPARISON_P (op)
> > + && VECTOR_MODE_P (outermode)
> > + && VECTOR_MODE_P (innermode)
> > + && (known_eq (GET_MODE_NUNITS (outermode), GET_MODE_NUNITS
> > (innermode)))
> > + && (known_eq (GET_MODE_UNIT_SIZE (outermode),
> > + GET_MODE_UNIT_SIZE (innermode))))
>
> Redundant brackets around the known_eq calls.
>
> > + return gen_rtx_fmt_ee (GET_CODE (op), outermode, XEXP (op, 0), XEXP
> > (op, 1));
>
> This should use simplify_gen_relational, so that we try to simplify
> the new expression.
Does the attached version look OK ?
Thanks,
Prathamesh
>
> Richard
diff --git a/gcc/fwprop.c b/gcc/fwprop.c
index 45703fe5f01..e6f37527192 100644
--- a/gcc/fwprop.c
+++ b/gcc/fwprop.c
@@ -448,6 +448,18 @@ enum {
PR_OPTIMIZE_FOR_SPEED = 4
};
+/* Check that X has a single def. */
+
+static bool
+reg_single_def_p (rtx x)
+{
+ if (!REG_P (x))
+ return false;
+
+ int regno = REGNO (x);
+ return (DF_REG_DEF_COUNT (regno) == 1
+ && !bitmap_bit_p (DF_LR_OUT (ENTRY_BLOCK_PTR_FOR_FN (cfun)), regno));
+}
/* Replace all occurrences of OLD in *PX with NEW and try to simplify the
resulting expression. Replace *PX with a new RTL expression if an
@@ -547,6 +559,54 @@ propagate_rtx_1 (rtx *px, rtx old_rtx, rtx new_rtx, int flags)
tem = simplify_gen_subreg (mode, op0, GET_MODE (SUBREG_REG (x)),
SUBREG_BYTE (x));
}
+
+ else
+ {
+ rtvec vec;
+ rtvec newvec;
+ const char *fmt = GET_RTX_FORMAT (code);
+ rtx op;
+
+ for (int i = 0; fmt[i]; i++)
+ switch (fmt[i])
+ {
+ case 'E':
+ vec = XVEC (x, i);
+ newvec = vec;
+ for (int j = 0; j < GET_NUM_ELEM (vec); j++)
+ {
+ op = RTVEC_ELT (vec, j);
+ valid_ops &= propagate_rtx_1 (&op, old_rtx, new_rtx, flags);
+ if (op != RTVEC_ELT (vec, j))
+ {
+ if (newvec == vec)
+ {
+ newvec = shallow_copy_rtvec (vec);
+ if (!tem)
+ tem = shallow_copy_rtx (x);
+ XVEC (tem, i) = newvec;
+ }
+ RTVEC_ELT (newvec, j) = op;
+ }
+ }
+ break;
+
+ case 'e':
+ if (XEXP (x, i))
+ {
+ op = XEXP (x, i);
+ valid_ops &= propagate_rtx_1 (&op, old_rtx, new_rtx, flags);
+ if (op != XEXP (x, i))
+ {
+ if (!tem)
+ tem = shallow_copy_rtx (x);
+ XEXP (tem, i) = op;
+ }
+ }
+ break;
+ }
+ }
+
break;
case RTX_OBJ:
@@ -1370,10 +1430,11 @@ forward_propagate_and_simplify (df_ref use, rtx_insn *def_insn, rtx def_set)
/* Given a use USE of an insn, if it has a single reaching
definition, try to forward propagate it into that insn.
- Return true if cfg cleanup will be needed. */
+ Return true if cfg cleanup will be needed.
+ REG_PROP_ONLY is true if we should only propagate register copies. */
static bool
-forward_propagate_into (df_ref use)
+forward_propagate_into (df_ref use, bool reg_prop_only = false)
{
df_ref def;
rtx_insn *def_insn, *use_insn;
@@ -1394,10 +1455,6 @@ forward_propagate_into (df_ref use)
if (DF_REF_IS_ARTIFICIAL (def))
return false;
- /* Do not propagate loop invariant definitions inside the loop. */
- if (DF_REF_BB (def)->loop_father != DF_REF_BB (use)->loop_father)
- return false;
-
/* Check if the use is still present in the insn! */
use_insn = DF_REF_INSN (use);
if (DF_REF_FLAGS (use) & DF_REF_IN_NOTE)
@@ -1415,6 +1472,19 @@ forward_propagate_into (df_ref use)
if (!def_set)
return false;
+ if (reg_prop_only
+ && (!reg_single_def_p (SET_SRC (def_set))
+ || !reg_single_def_p (SET_DEST (def_set))))
+ return false;
+
+ /* Allow propagations into a loop only for reg-to-reg copies, since
+ replacing one register by another shouldn't increase the cost. */
+
+ if (DF_REF_BB (def)->loop_father != DF_REF_BB (use)->loop_father
+ && (!reg_single_def_p (SET_SRC (def_set))
+ || !reg_single_def_p (SET_DEST (def_set))))
+ return false;
+
/* Only try one kind of propagation. If two are possible, we'll
do it on the following iterations. */
if (forward_propagate_and_simplify (use, def_insn, def_set)
@@ -1483,7 +1553,7 @@ gate_fwprop (void)
}
static unsigned int
-fwprop (void)
+fwprop (bool fwprop_addr_p)
{
unsigned i;
@@ -1502,11 +1572,16 @@ fwprop (void)
df_ref use = DF_USES_GET (i);
if (use)
- if (DF_REF_TYPE (use) == DF_REF_REG_USE
- || DF_REF_BB (use)->loop_father == NULL
- /* The outer most loop is not really a loop. */
- || loop_outer (DF_REF_BB (use)->loop_father) == NULL)
- forward_propagate_into (use);
+ {
+ if (DF_REF_TYPE (use) == DF_REF_REG_USE
+ || DF_REF_BB (use)->loop_father == NULL
+ /* The outer most loop is not really a loop. */
+ || loop_outer (DF_REF_BB (use)->loop_father) == NULL)
+ forward_propagate_into (use, fwprop_addr_p);
+
+ else if (fwprop_addr_p)
+ forward_propagate_into (use, false);
+ }
}
fwprop_done ();
@@ -1537,7 +1612,7 @@ public:
/* opt_pass methods: */
virtual bool gate (function *) { return gate_fwprop (); }
- virtual unsigned int execute (function *) { return fwprop (); }
+ virtual unsigned int execute (function *) { return fwprop (false); }
}; // class pass_rtl_fwprop
@@ -1549,33 +1624,6 @@ make_pass_rtl_fwprop (gcc::context *ctxt)
return new pass_rtl_fwprop (ctxt);
}
-static unsigned int
-fwprop_addr (void)
-{
- unsigned i;
-
- fwprop_init ();
-
- /* Go through all the uses. df_uses_create will create new ones at the
- end, and we'll go through them as well. */
- for (i = 0; i < DF_USES_TABLE_SIZE (); i++)
- {
- if (!propagations_left)
- break;
-
- df_ref use = DF_USES_GET (i);
- if (use)
- if (DF_REF_TYPE (use) != DF_REF_REG_USE
- && DF_REF_BB (use)->loop_father != NULL
- /* The outer most loop is not really a loop. */
- && loop_outer (DF_REF_BB (use)->loop_father) != NULL)
- forward_propagate_into (use);
- }
-
- fwprop_done ();
- return 0;
-}
-
namespace {
const pass_data pass_data_rtl_fwprop_addr =
@@ -1600,7 +1648,7 @@ public:
/* opt_pass methods: */
virtual bool gate (function *) { return gate_fwprop (); }
- virtual unsigned int execute (function *) { return fwprop_addr (); }
+ virtual unsigned int execute (function *) { return fwprop (true); }
}; // class pass_rtl_fwprop_addr
diff --git a/gcc/simplify-rtx.c b/gcc/simplify-rtx.c
index 89a46a933fa..c588c91562b 100644
--- a/gcc/simplify-rtx.c
+++ b/gcc/simplify-rtx.c
@@ -6697,6 +6697,17 @@ simplify_subreg (machine_mode outermode, rtx op,
}
}
+ /* If OP is a vector comparison and the subreg is not changing the
+ number of elements or the size of the elements, change the result
+ of the comparison to the new mode. */
+ if (COMPARISON_P (op)
+ && VECTOR_MODE_P (outermode)
+ && VECTOR_MODE_P (innermode)
+ && known_eq (GET_MODE_NUNITS (outermode), GET_MODE_NUNITS (innermode))
+ && known_eq (GET_MODE_UNIT_SIZE (outermode),
+ GET_MODE_UNIT_SIZE (innermode)))
+ return simplify_gen_relational (GET_CODE (op), outermode, innermode,
+ XEXP (op, 0), XEXP (op, 1));
return NULL_RTX;
}
diff --git a/gcc/testsuite/gfortran.dg/pr88833.f90 b/gcc/testsuite/gfortran.dg/pr88833.f90
new file mode 100644
index 00000000000..224e6ce5f3d
--- /dev/null
+++ b/gcc/testsuite/gfortran.dg/pr88833.f90
@@ -0,0 +1,9 @@
+! { dg-do assemble { target aarch64_asm_sve_ok } }
+! { dg-options "-O3 -march=armv8.2-a+sve --save-temps" }
+
+subroutine foo(x)
+ real :: x(100)
+ x = x + 10
+end subroutine foo
+
+! { dg-final { scan-assembler {\twhilelo\tp[0-9]+\.s, wzr, (w[0-9]+).*\twhilelo\tp[0-9]+\.s, w[0-9]+, \1} } }
