I am on vacation today. I will back tomorrow or late tonight.
I think we can land theadvector before spring festival as long as it is not invasive to RVV1.0
---- Replied Message ----
From | joshua<cooper.jos...@linux.alibaba.com> |
Date | 01/08/2024 11:17 |
To | Kito Cheng<kito.ch...@gmail.com> |
Cc | juzhe.zh...@rivai.ai<juzhe.zh...@rivai.ai>, jeffreyalaw<jeffreya...@gmail.com>, gcc-patches<gcc-patches@gcc.gnu.org>, Jim Wilson<jim.wilson....@gmail.com>, palmer<pal...@dabbelt.com>, andrew<and...@sifive.com>, philipp.tomsich<philipp.toms...@vrull.eu>, christoph.muellner<christoph.muell...@vrull.eu>, jinma<ji...@linux.alibaba.com>, cooper.qu<cooper...@linux.alibaba.com> |
Subject | Re:Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector. |
Hi Kito,
Thank you for your support.
So even during stage 4, we can merge this for GCC 14?
------------------------------------------------------------------
发件人:Kito Cheng <kito.ch...@gmail.com>
发送时间:2024年1月8日(星期一) 11:06
收件人:joshua<cooper.jos...@linux.alibaba.com>
抄 送:"juzhe.zh...@rivai.ai"<juzhe.zh...@rivai.ai>; jeffreyalaw<jeffreya...@gmail.com>; "gcc-patches"<gcc-patches@gcc.gnu.org>; Jim Wilson<jim.wilson....@gmail.com>; palmer<pal...@dabbelt.com>; andrew<and...@sifive.com>; "philipp.tomsich"<philipp.toms...@vrull.eu>; "christoph.muellner"<christoph.muell...@vrull.eu>; jinma<ji...@linux.alibaba.com>; "cooper.qu"<cooper...@linux.alibaba.com>
主 题:Re: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
I am ok with merging this for GCC 14, as we discussed several times in
the RISC-V GCC sync up meeting, I think at least we reach consensus
among Jeff Law, Palmer Dabbelt and me.
But please be careful: don't break anything for standard vector stuff.
On Mon, Jan 8, 2024 at 10:11 AM joshua <cooper.jos...@linux.alibaba.com> wrote:
>
> Hi Juzhe,
>
> Stage 3 will close today and there are still some patches that
> haven't been reviewed left.
> So is it possible to get xtheadvector merged in GCC-14?
> We emailed Kito regarding this, but haven't got any reply yet.
>
> Joshua
>
>
>
>
>
>
> ------------------------------------------------------------------
> 发件人:juzhe.zh...@rivai.ai <juzhe.zh...@rivai.ai>
> 发送时间:2024年1月4日(星期四) 17:18
> 收件人:"cooper.joshua"<cooper.jos...@linux.alibaba.com>; jeffreyalaw<jeffreya...@gmail.com>; "gcc-patches"<gcc-patches@gcc.gnu.org>
> 抄 送:Jim Wilson<jim.wilson....@gmail.com>; palmer<pal...@dabbelt.com>; andrew<and...@sifive.com>; "philipp.tomsich"<philipp.toms...@vrull.eu>; "christoph.muellner"<christoph.muell...@vrull.eu>; jinma<ji...@linux.alibaba.com>; "cooper.qu"<cooper...@linux.alibaba.com>
> 主 题:Re: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
>
> \ No newline at end of file
> Each file needs newline.
>
>
> I am not able to review arch stuff. This needs kito.
>
>
> Besides, Andrew Pinski want us defer theadvector to GCC-15.
>
>
> I have no strong opinion here.
>
>
> juzhe.zh...@rivai.ai
>
>
> 发件人: joshua
> 发送时间: 2024-01-04 17:15
> 收件人: 钟居哲; Jeff Law; gcc-patches
> 抄送: jim.wilson.gcc; palmer; andrew; philipp.tomsich; Christoph Müllner; jinma; Cooper Qu
> 主题: Re:Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
> Hi Juzhe,
>
> So is the following patch that this patch relies on OK to commit?
> https://gcc.gnu.org/pipermail/gcc-patches/2023-December/641533.html
>
> Joshua
>
>
>
>
> ------------------------------------------------------------------
> 发件人:钟居哲 <juzhe.zh...@rivai.ai>
> 发送时间:2024年1月2日(星期二) 06:57
> 收件人:Jeff Law<jeffreya...@gmail.com>; "cooper.joshua"<cooper.jos...@linux.alibaba.com>; "gcc-patches"<gcc-patches@gcc.gnu.org>
> 抄 送:"jim.wilson.gcc"<jim.wilson....@gmail.com>; palmer<pal...@dabbelt.com>; andrew<and...@sifive.com>; "philipp.tomsich"<philipp.toms...@vrull.eu>; "Christoph Müllner"<christoph.muell...@vrull.eu>; jinma<ji...@linux.alibaba.com>; Cooper Qu<cooper...@linux.alibaba.com>
> 主 题:Re: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
>
> This is Ok from my side.
> But before commit this patch, I think we need this patch first:
> https://gcc.gnu.org/pipermail/gcc-patches/2023-December/641533.html
>
>
> I will be back to work so I will take a look at other patches today.
> juzhe.zh...@rivai.ai
>
>
> From: Jeff Law
> Date: 2024-01-01 01:43
> To: Jun Sha (Joshua); gcc-patches
> CC: jim.wilson.gcc; palmer; andrew; philipp.tomsich; christoph.muellner; juzhe.zhong; Jin Ma; Xianmiao Qu
> Subject: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
>
>
> On 12/28/23 21:19, Jun Sha (Joshua) wrote:
> > This patch adds th. prefix to all XTheadVector instructions by
> > implementing new assembly output functions. We only check the
> > prefix is 'v', so that no extra attribute is needed.
> >
> > gcc/ChangeLog:
> >
> > * config/riscv/riscv-protos.h (riscv_asm_output_opcode):
> > New function to add assembler insn code prefix/suffix.
> > * config/riscv/riscv.cc (riscv_asm_output_opcode): Likewise.
> > * config/riscv/riscv.h (ASM_OUTPUT_OPCODE): Likewise.
> >
> > Co-authored-by: Jin Ma <ji...@linux.alibaba.com>
> > Co-authored-by: Xianmiao Qu <cooper...@linux.alibaba.com>
> > Co-authored-by: Christoph Müllner <christoph.muell...@vrull.eu>
> > ---
> > gcc/config/riscv/riscv-protos.h | 1 +
> > gcc/config/riscv/riscv.cc | 14 ++++++++++++++
> > gcc/config/riscv/riscv.h | 4 ++++
> > .../gcc.target/riscv/rvv/xtheadvector/prefix.c | 12 ++++++++++++
> > 4 files changed, 31 insertions(+)
> > create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/xtheadvector/prefix.c
> >
> > diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
> > index 31049ef7523..5ea54b45703 100644
> > --- a/gcc/config/riscv/riscv-protos.h
> > +++ b/gcc/config/riscv/riscv-protos.h
> > @@ -102,6 +102,7 @@ struct riscv_address_info {
> > };
> >
> > /* Routines implemented in riscv.cc. */
> > +extern const char *riscv_asm_output_opcode (FILE *asm_out_file, const char *p);
> > extern enum riscv_symbol_type riscv_classify_symbolic_expression (rtx);
> > extern bool riscv_symbolic_constant_p (rtx, enum riscv_symbol_type *);
> > extern int riscv_float_const_rtx_index_for_fli (rtx);
> > diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
> > index 0d1cbc5cb5f..ea1d59d9cf2 100644
> > --- a/gcc/config/riscv/riscv.cc
> > +++ b/gcc/config/riscv/riscv.cc
> > @@ -5636,6 +5636,20 @@ riscv_get_v_regno_alignment (machine_mode mode)
> > return lmul;
> > }
> >
> > +/* Define ASM_OUTPUT_OPCODE to do anything special before
> > + emitting an opcode. */
> > +const char *
> > +riscv_asm_output_opcode (FILE *asm_out_file, const char *p)
> > +{
> > + /* We need to add th. prefix to all the xtheadvector
> > + insturctions here.*/
> > + if (TARGET_XTHEADVECTOR && current_output_insn != NULL_RTX &&
> > + p[0] == 'v')
> > + fputs ("th.", asm_out_file);
> > +
> > + return p;
> Just a formatting nit. The GNU standards break lines before the
> operator, not after. So
> if (TARGET_XTHEADVECTOR
> && current_output_insn != NULL
> && p[0] == 'v')
>
> Note that current_output_insn is "extern rtx_insn *", so use NULL, not
> NULL_RTX.
>
> Neither of these nits require a new version for review. Just fix them.
>
> If Juzhe is fine with this, so am I. We can refine it if necessary later.
>
> jeff
>
>
>
>
>
Thank you for your support.
So even during stage 4, we can merge this for GCC 14?
------------------------------------------------------------------
发件人:Kito Cheng <kito.ch...@gmail.com>
发送时间:2024年1月8日(星期一) 11:06
收件人:joshua<cooper.jos...@linux.alibaba.com>
抄 送:"juzhe.zh...@rivai.ai"<juzhe.zh...@rivai.ai>; jeffreyalaw<jeffreya...@gmail.com>; "gcc-patches"<gcc-patches@gcc.gnu.org>; Jim Wilson<jim.wilson....@gmail.com>; palmer<pal...@dabbelt.com>; andrew<and...@sifive.com>; "philipp.tomsich"<philipp.toms...@vrull.eu>; "christoph.muellner"<christoph.muell...@vrull.eu>; jinma<ji...@linux.alibaba.com>; "cooper.qu"<cooper...@linux.alibaba.com>
主 题:Re: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
I am ok with merging this for GCC 14, as we discussed several times in
the RISC-V GCC sync up meeting, I think at least we reach consensus
among Jeff Law, Palmer Dabbelt and me.
But please be careful: don't break anything for standard vector stuff.
On Mon, Jan 8, 2024 at 10:11 AM joshua <cooper.jos...@linux.alibaba.com> wrote:
>
> Hi Juzhe,
>
> Stage 3 will close today and there are still some patches that
> haven't been reviewed left.
> So is it possible to get xtheadvector merged in GCC-14?
> We emailed Kito regarding this, but haven't got any reply yet.
>
> Joshua
>
>
>
>
>
>
> ------------------------------------------------------------------
> 发件人:juzhe.zh...@rivai.ai <juzhe.zh...@rivai.ai>
> 发送时间:2024年1月4日(星期四) 17:18
> 收件人:"cooper.joshua"<cooper.jos...@linux.alibaba.com>; jeffreyalaw<jeffreya...@gmail.com>; "gcc-patches"<gcc-patches@gcc.gnu.org>
> 抄 送:Jim Wilson<jim.wilson....@gmail.com>; palmer<pal...@dabbelt.com>; andrew<and...@sifive.com>; "philipp.tomsich"<philipp.toms...@vrull.eu>; "christoph.muellner"<christoph.muell...@vrull.eu>; jinma<ji...@linux.alibaba.com>; "cooper.qu"<cooper...@linux.alibaba.com>
> 主 题:Re: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
>
> \ No newline at end of file
> Each file needs newline.
>
>
> I am not able to review arch stuff. This needs kito.
>
>
> Besides, Andrew Pinski want us defer theadvector to GCC-15.
>
>
> I have no strong opinion here.
>
>
> juzhe.zh...@rivai.ai
>
>
> 发件人: joshua
> 发送时间: 2024-01-04 17:15
> 收件人: 钟居哲; Jeff Law; gcc-patches
> 抄送: jim.wilson.gcc; palmer; andrew; philipp.tomsich; Christoph Müllner; jinma; Cooper Qu
> 主题: Re:Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
> Hi Juzhe,
>
> So is the following patch that this patch relies on OK to commit?
> https://gcc.gnu.org/pipermail/gcc-patches/2023-December/641533.html
>
> Joshua
>
>
>
>
> ------------------------------------------------------------------
> 发件人:钟居哲 <juzhe.zh...@rivai.ai>
> 发送时间:2024年1月2日(星期二) 06:57
> 收件人:Jeff Law<jeffreya...@gmail.com>; "cooper.joshua"<cooper.jos...@linux.alibaba.com>; "gcc-patches"<gcc-patches@gcc.gnu.org>
> 抄 送:"jim.wilson.gcc"<jim.wilson....@gmail.com>; palmer<pal...@dabbelt.com>; andrew<and...@sifive.com>; "philipp.tomsich"<philipp.toms...@vrull.eu>; "Christoph Müllner"<christoph.muell...@vrull.eu>; jinma<ji...@linux.alibaba.com>; Cooper Qu<cooper...@linux.alibaba.com>
> 主 题:Re: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
>
> This is Ok from my side.
> But before commit this patch, I think we need this patch first:
> https://gcc.gnu.org/pipermail/gcc-patches/2023-December/641533.html
>
>
> I will be back to work so I will take a look at other patches today.
> juzhe.zh...@rivai.ai
>
>
> From: Jeff Law
> Date: 2024-01-01 01:43
> To: Jun Sha (Joshua); gcc-patches
> CC: jim.wilson.gcc; palmer; andrew; philipp.tomsich; christoph.muellner; juzhe.zhong; Jin Ma; Xianmiao Qu
> Subject: Re: [PATCH v4] RISC-V: Adds the prefix "th." for the instructions of XTheadVector.
>
>
>
> On 12/28/23 21:19, Jun Sha (Joshua) wrote:
> > This patch adds th. prefix to all XTheadVector instructions by
> > implementing new assembly output functions. We only check the
> > prefix is 'v', so that no extra attribute is needed.
> >
> > gcc/ChangeLog:
> >
> > * config/riscv/riscv-protos.h (riscv_asm_output_opcode):
> > New function to add assembler insn code prefix/suffix.
> > * config/riscv/riscv.cc (riscv_asm_output_opcode): Likewise.
> > * config/riscv/riscv.h (ASM_OUTPUT_OPCODE): Likewise.
> >
> > Co-authored-by: Jin Ma <ji...@linux.alibaba.com>
> > Co-authored-by: Xianmiao Qu <cooper...@linux.alibaba.com>
> > Co-authored-by: Christoph Müllner <christoph.muell...@vrull.eu>
> > ---
> > gcc/config/riscv/riscv-protos.h | 1 +
> > gcc/config/riscv/riscv.cc | 14 ++++++++++++++
> > gcc/config/riscv/riscv.h | 4 ++++
> > .../gcc.target/riscv/rvv/xtheadvector/prefix.c | 12 ++++++++++++
> > 4 files changed, 31 insertions(+)
> > create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/xtheadvector/prefix.c
> >
> > diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
> > index 31049ef7523..5ea54b45703 100644
> > --- a/gcc/config/riscv/riscv-protos.h
> > +++ b/gcc/config/riscv/riscv-protos.h
> > @@ -102,6 +102,7 @@ struct riscv_address_info {
> > };
> >
> > /* Routines implemented in riscv.cc. */
> > +extern const char *riscv_asm_output_opcode (FILE *asm_out_file, const char *p);
> > extern enum riscv_symbol_type riscv_classify_symbolic_expression (rtx);
> > extern bool riscv_symbolic_constant_p (rtx, enum riscv_symbol_type *);
> > extern int riscv_float_const_rtx_index_for_fli (rtx);
> > diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
> > index 0d1cbc5cb5f..ea1d59d9cf2 100644
> > --- a/gcc/config/riscv/riscv.cc
> > +++ b/gcc/config/riscv/riscv.cc
> > @@ -5636,6 +5636,20 @@ riscv_get_v_regno_alignment (machine_mode mode)
> > return lmul;
> > }
> >
> > +/* Define ASM_OUTPUT_OPCODE to do anything special before
> > + emitting an opcode. */
> > +const char *
> > +riscv_asm_output_opcode (FILE *asm_out_file, const char *p)
> > +{
> > + /* We need to add th. prefix to all the xtheadvector
> > + insturctions here.*/
> > + if (TARGET_XTHEADVECTOR && current_output_insn != NULL_RTX &&
> > + p[0] == 'v')
> > + fputs ("th.", asm_out_file);
> > +
> > + return p;
> Just a formatting nit. The GNU standards break lines before the
> operator, not after. So
> if (TARGET_XTHEADVECTOR
> && current_output_insn != NULL
> && p[0] == 'v')
>
> Note that current_output_insn is "extern rtx_insn *", so use NULL, not
> NULL_RTX.
>
> Neither of these nits require a new version for review. Just fix them.
>
> If Juzhe is fine with this, so am I. We can refine it if necessary later.
>
> jeff
>
>
>
>
>