Greetings! Thanks for your feedback, Matt!
I'm going to try to eliminate the gettext dependency and do the /usr/local/bin powerpc-macosx.h patch for 2.6.8 before release. Should be as simple as adding --with-included-gettext to the binutils subconfigure commands in configure.in. Will keep you posted. Take care, Matt Kaufmann <[EMAIL PROTECTED]> writes: > Hi, Camm > > Thanks for your help! I have successfully built GCL 2.6.8pre on my desktop > Power Mac G5 running MAC OS 10.4.2, without fink, and have successfully run > the > ACL2 regression suite. I followed instructions for building GCL on Mac OS X > based on Robert Krug's instructions, but modified according to your > suggestions, that I have placed here > > http://www.cs.utexas.edu/users/moore/acl2/v2-9/installation.html#Obtaining-GCL > > -- more specifically, here: > > http://www.cs.utexas.edu/users/moore/acl2/v2-9/installation.html#gcl-mac > > The rest of this email is just about a couple of gettext issues, in case > you're > interested. Actually, since most ACL2 users use GCL only inside emacs, I'd be > delighted if there were a way to build GCL without the dependency on gettext. > Anyhow, please let me know if there's a more appropriate place to report these > issues. > > The first issue, shown below was solved by doing the build in a terminal, > rather than in a shell running inside Carbon Emacs, where after > > ./configure --disable-csharp > > and then > > make > > I had gotten the following error. > > ====================================================================== > > Making all in misc > WARNING: Warnings can be ignored. :-) > if test "emacs" != no; then \ > set x; \ > list='start-po.el po-mode.el po-compat.el'; for p in $list; do \ > if test -f "$p"; then d=; else d="./"; fi; \ > set x "$@" "$d$p"; shift; \ > done; \ > shift; \ > EMACS="emacs" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \ > else : ; fi > Cannot open load file: /Applications/Downloaded > Software/Emacs.app/Contents/MacOS/libexec/fns-21.2.1.el > make[3]: *** [elc-stamp] Error 1 > make[2]: *** [all-recursive] Error 1 > make[1]: *** [all] Error 2 > make: *** [all-recursive] Error 1 > bbh:/Applications/Downloads/gettext/gettext-0.14.5 kaufmann$ > > ====================================================================== > > The other problem was that executables such as msgfmt were installed in > /usr/local/bin, which wasn't on my path. I'm not sure how to inform users > that this needs to be put on $PATH (which fixed the problem). > > Thanks -- > -- Matt > Cc: [EMAIL PROTECTED], [EMAIL PROTECTED], [email protected], > Aurelien Chanudet <[EMAIL PROTECTED]> > From: Camm Maguire <[EMAIL PROTECTED]> > Date: 14 Dec 2005 11:04:42 -0500 > User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.2 > Content-Type: text/plain; charset=us-ascii > X-SpamAssassin-Status: No, hits=-2.4 required=5.0 > X-UTCS-Spam-Status: No, hits=-128 required=180 > > Greetings! And thank you for this! > > My currently preferred solution for macosx is to use version 2.6.8pre > from cvs. I know this sounds unstable, but this is merely a minor > bugfix branch against 2.6.7 (i.e. not the far more significantly > modified 2.7.0) and should be released shortly pending testing. This > branch includes the fix for your tiny3.lisp example below, the fix to > plt and a few other files Robert mentions in his notes, and an upgrade > of Aurelien's macosx binutils support to the latest binutils version. > We've been caught by a macosx version change -- all works now on the > latest macosx, but for now we have no testbed for the older system. > > As for fink, this is a good point which warrants discussion. I > thought it was virtually standard. If not, I think we should make GCL > not depend on gettext if possible. In either case, whatever > environment variables we decide are needed to build gcl on the mac > should be pushed to the various command lines via configure. > > For example, I use at present > > export PATH=/sw/bin:/sw/sbin:/usr/local/bin:$PATH # I don't think these > are actually > export LIBRARY_PATH=/sw/lib > export C_INCLUDE_PATH=/sw/include > export CPPFLAGS="-no-cpp-precomp" > > The first three are likely only needed for gettext. The last was > needed to handle at least earlier versions of the apple gcc -- is this > still required? Well, I just tried it and apparently it is not > required any longer on the latest macosx, but a proper treatment would > conditionalize it on the older apple gcc being present. > > So I guess my recommendation boils down to this, which might be > simplified further before 2.6.8 is released: > > With fink: > export PATH=/sw/bin:/sw/sbin:/usr/local/bin:$PATH # I don't think these > are actually > export LIBRARY_PATH=/sw/lib > export C_INCLUDE_PATH=/sw/include > export CVSROOT=:pserver:[EMAIL PROTECTED]:/sources/gcl > cvs -z9 -q co -d gcl-2.6.8pre -r Version_2_6_8pre > cd gcl-2.6.8pre && ./configure && make > > Without fink: > <robert's gettext instructions> > <robert's h/powerpc-macosx.defs patch> > export CVSROOT=:pserver:[EMAIL PROTECTED]:/sources/gcl > cvs -z9 -q co -d gcl-2.6.8pre -r Version_2_6_8pre > cd gcl-2.6.8pre && ./configure && make > > > Thoughts/suggestions most welcome. Aurelien -- any ideas you have on > robustifying this before 2.6.8 is released are especially appreciated. > > Take care, > > > > > Matt Kaufmann <[EMAIL PROTECTED]> writes: > > > Howdy! > > > > This email is in two parts. For one, I thought I'd report that I have > > successfully followed instructions supplied by Robert Krug in order to > build > > GCL 2.6.7 on a Mac (OS X) -- in my case, a 1.67GHz PowerPC G4 notebook. > In > > case you're interested, below are his notes, which I plan to put up on > the web > > in a couple of days. Do you imagine an update to GCL 2.6.7 soon that > makes the > > extra edits unnecessary? > > > > Underneath Robert's notes, I have placed a file tiny3.lisp that I > derived from > > a failed certification using an ACL2 (development version as of 10/23) > built on > > that GCL on that Mac (books/workshops/1999/simulator/tiny.lisp). I've > done > > LOTS of trimming of tiny.lisp to create tiny3.lisp, which causes the > error in > > GCL (i.e., without ACL2). (The good news is that this seems to be the > only > > problem with the full regression suite.) Here is a log showing the > error: > > > > ====================================================================== > > > > > matt-kaufmanns-powerbook-g4-15:~/acl2/current/books/workshops/1999/simulator > kaufmann$ gcl > > GCL (GNU Common Lisp) 2.6.7 CLtL1 Dec 12 2005 12:23:55 > > Source License: LGPL(gcl,gmp), GPL(unexec,bfd) > > Binary License: GPL due to GPL'ed components: (READLINE BFD UNEXEC) > > Modifications of this banner must retain notice of a compatible license > > Dedicated to the memory of W. Schelter > > > > Use (help) to get some basic information on how to use GCL. > > > > >(compile-file "tiny3.lisp") > > > > Compiling tiny3.lisp. > > End of Pass 1. > > End of Pass 2. > > OPTIMIZE levels: Safety=0 (No runtime error checking), Space=0, Speed=3 > > Finished compiling tiny3.lisp. > > #p"tiny3.o" > > > > >(load "tiny3.o") > > > > Loading tiny3.o > > error: unknown relocation entry > > > > Error: Cannot get relocated section contents > > > > Fast links are on: do (si::use-fast-links nil) for debugging > > Error signalled by EVAL. > > Broken at LOAD. Type :H for Help. > > >> > > > > ========================= Robert's notes ========================= > > > > The normal build process for GCL 2.6.7 on Mac OS X assumes that > > you have installed Fink on your Mac. (If you do not know what > > this is, don't worry; you probably don't have it or want it.) > > Here is the process which worked on my Mac. > > > > Building Gcl 2.6.7 On Os X 10.4.3 Without Fink > > > > 1. First, get and install the gettext library. > > You can get it at: > > ftp.gnu.org/gnu/<Latest Version> > > As of this writing, 0.14 was the latest version. > > If you download a newer version you will need to adjust > > the tar command below to refer to the file you downloaded. > > > > To Build It: > > A. Untar it in a convenient location: > > tar zxf gettext-0.14.tar.gz > > (If you downloaded this from within a web browser, > > you may have to use > > tar xf Gettext-0.14.Tar > > instead.) > > B. Connect to the gettext directory and configure: > > cd gettext-0.14 > > ./configure --disable-csharp > > C. Build and install the library: > > make > > sudo make install > > > > 2. Build And Install Gcl. (First, obtain from ftp://ftp.gnu/org/, cd > gnu, cd gcl, > > get gcl-2.6.7.tar.gz, tar xfz gcl-2.6.7.tar.gz) > > > > A. cd <Gcl Directory> > > > > B. You Now Need To Patch Several Files: > > h/powerpc-macosx.h > > Replace the line: > > extern char *my_sbrk(int incr); > > with: > > void *my_sbrk(int incr); > > > > o/unexmacosx.c > > Replace the line: > > char *my_sbrk (int incr) > > with: > > void *my_sbrk (int incr) > > > > h/powerpc-macosx.defs > > Replace the line: > > LIBS := `echo $(LIBS) | sed -e 's/-lncurses/ /'` > /sw/lib/libintl.dylib > > With: > > LIBS := `echo $(LIBS) | sed -e 's/-lncurses/ /'` > /usr/local/lib/libintl.dylib > > > > C. Configure and start to build gcl > > ./configure > > make > > > > This Make Will Fail, But Do Not Fear! > > > > D. Patch o/plt.h > > Remove the underscores in front of > > _getc and _putc > > > > E. Build and install gcl > > make > > sudo make install > > > > ============================ file tiny3.lisp ============================ > > > > (in-package "USER") > > > > (defvar *user-stobj-alist*) > > > > (DEFUN PROGC (ST) > > (THE (UNSIGNED-BYTE 10) > > (AREF (THE (SIMPLE-ARRAY (UNSIGNED-BYTE 10) (1)) (SVREF ST 0)) 0))) > > (DEFUN UPDATE-PROGC (V ST) > > (DECLARE (TYPE (UNSIGNED-BYTE 10) V)) > > (PROGN > > (SETF (AREF (THE (SIMPLE-ARRAY (UNSIGNED-BYTE 10) (1)) > > (SVREF ST 0)) > > 0) > > (THE (UNSIGNED-BYTE 10) V)) > > ST)) > > (DEFUN MEMI (I ST) > > (DECLARE (TYPE (INTEGER 0 268435455) I)) > > (THE (SIGNED-BYTE 32) > > (AREF (THE (SIMPLE-ARRAY (SIGNED-BYTE 32) (*)) (SVREF ST 1)) > > (THE (INTEGER 0 268435455) I)))) > > (DEFUN UPDATE-MEMI (I V ST) > > (DECLARE (TYPE (INTEGER 0 268435455) I) (TYPE (SIGNED-BYTE 32) V)) > > (PROGN > > (SETF (AREF (THE (SIMPLE-ARRAY (SIGNED-BYTE 32) (*)) > > (SVREF ST 1)) > > (THE (INTEGER 0 268435455) I)) > > (THE (SIGNED-BYTE 32) V)) > > ST)) > > (DEFUN DTOS (ST) > > (THE (UNSIGNED-BYTE 10) > > (AREF (THE (SIMPLE-ARRAY (UNSIGNED-BYTE 10) (1)) (SVREF ST 2)) 0))) > > (DEFUN UPDATE-DTOS (V ST) > > (DECLARE (TYPE (UNSIGNED-BYTE 10) V)) > > (PROGN > > (SETF (AREF (THE (SIMPLE-ARRAY (UNSIGNED-BYTE 10) (1)) > > (SVREF ST 2)) > > 0) > > (THE (UNSIGNED-BYTE 10) V)) > > ST)) > > (DEFUN CTOS (ST) > > (THE (UNSIGNED-BYTE 10) > > (AREF (THE (SIMPLE-ARRAY (UNSIGNED-BYTE 10) (1)) (SVREF ST 3)) 0))) > > (DEFUN UPDATE-CTOS (V ST) > > (DECLARE (TYPE (UNSIGNED-BYTE 10) V)) > > (PROGN > > (SETF (AREF (THE (SIMPLE-ARRAY (UNSIGNED-BYTE 10) (1)) > > (SVREF ST 3)) > > 0) > > (THE (UNSIGNED-BYTE 10) V)) > > ST)) > > > > (defmacro Int32 (x) `(the (signed-byte 32) ,x)) > > (defmacro Nat10 (x) `(the (unsigned-byte 10) ,x)) > > (defmacro MAX_NAT<10> () 1023) > > > > (defmacro fix|10| (x) > > `(Nat10 (logand (MAX_NAT<10>) ,x))) > > > > (defmacro +<32> (x y) > > `(Int32 (+ ,x ,y))) > > > > (defmacro +|10| (x y) > > `(Nat10 (logand (+<32> ,x ,y) (MAX_NAT<10>)))) > > > > (defun pushus (val st) > > (declare (type (signed-byte 32) val)) > > (let ((dtos (dtos st))) > > (declare (type (unsigned-byte 10) dtos)) > > (let ((st (update-memi dtos (Int32 val) st))) > > (update-dtos (+|10| dtos -1) st)))) > > > > (defun next (st) > > (let ((progc (progc st)) > > (dtos (dtos st)) > > (ctos (ctos st))) > > (declare (type (unsigned-byte 10) progc dtos ctos)) > > > > (let ((ins (memi progc st))) > > (declare (type (signed-byte 32) ins)) > > > > (case ins > > > > (2 (let ((st (update-progc (+|10| progc 2) st))) > > (pushus (memi (+|10| progc 1) st) st))) > > > > (4 (update-progc (fix|10| (memi (+|10| progc 1) st)) st)) > > > > (5 (let ((nprogc (if (= (memi (+|10| dtos 1) st) 0) > > (fix|10| (memi (+|10| progc 1) st)) > > (+|10| progc 2)))) > > (declare (type (unsigned-byte 10) nprogc)) > > (let ((st (update-progc nprogc st))) > > (update-dtos (+|10| dtos 1) st)))) > > > > (7 (let ((nadd (fix|10| (memi (+|10| ctos 1) st)))) > > (declare (type (unsigned-byte 10) nadd)) > > (let ((st (update-progc nadd st))) > > (update-ctos (+|10| ctos 1) st)))) > > > > (9 (let ((st (update-progc (+|10| progc 1) st))) > > (pushus (memi (+|10| dtos 1) st) st))) > > > > (otherwise st))))) > > > > ====================================================================== > > > > Thanks -- > > -- Matt > > > > > > > > -- > Camm Maguire [EMAIL > PROTECTED] > ========================================================================== > "The earth is but one country, and mankind its citizens." -- Baha'u'llah > > > > -- Camm Maguire [EMAIL PROTECTED] ========================================================================== "The earth is but one country, and mankind its citizens." -- Baha'u'llah _______________________________________________ Gcl-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/gcl-devel
