Hi Javier, I did two changes at the same time (bad bad, never do that!): one updating the code from repo (as usual) and the other one updating vcpkg (cause there like 1000 changes in their Git and I though that was a good idea). I suspect the code is good but I’ll make sure doing that bisection method. Even though this error is rare:
3>LINK : fatal error LNK1104: cannot open file 'ogr_VDV.dir\Debug\ogr_VDV.lib' 3>Done building project "ogr_VDV.vcxproj" -- FAILED. I wonder why it is not writing (ogr_VDV it’s the only one that have the error). Thanks! De: Javier Jimenez Shaw <j...@jimenezshaw.com> Enviado el: dimarts, 27 de febrer de 2024 9:57 Para: Abel Pau <a....@creaf.uab.cat> CC: gdal-dev@lists.osgeo.org Asunto: Re: [gdal-dev] Some problems after updating Hi Abel, If you have clear when it started happening, maybe you can try to find the reason using https://git-scm.com/docs/git-bisect specially as you are reproducing it in your computer (CI is working fine, so that should be something related to your configuration). Replicate it working fine with an older checkout from the repo, then replicate it failing today, and look for the change that "breaks" it. If you cannot replicate the correct behaviour with an older checkout... then the problem is not the source code. Cheers, Javier. On Tue, 27 Feb 2024 at 09:15, Abel Pau via gdal-dev <gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org>> wrote: Hi again, I built and compiled the Gdal version in GitHub (without my changes) and the error is NOT gone. Anyone has compiled very recently and is capable to call ogr2ogr with no problems? Thanks De: gdal-dev <gdal-dev-boun...@lists.osgeo.org<mailto:gdal-dev-boun...@lists.osgeo.org>> En nombre de Abel Pau via gdal-dev Enviado el: dilluns, 26 de febrer de 2024 18:17 Para: Even Rouault <even.roua...@spatialys.com<mailto:even.roua...@spatialys.com>>; gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org> Asunto: Re: [gdal-dev] Some problems after updating Done but it doesn’t work. The error is the same. Any other idea? De: Even Rouault <even.roua...@spatialys.com<mailto:even.roua...@spatialys.com>> Enviado el: dilluns, 26 de febrer de 2024 17:55 Para: Abel Pau <a....@creaf.uab.cat<mailto:a....@creaf.uab.cat>>; gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org> Asunto: Re: [gdal-dev] Some problems after updating Perhaps try the good old methods: run the "clean" target and do a full rebuild Le 26/02/2024 à 17:48, Abel Pau via gdal-dev a écrit : It even now doesn’t work from Visual Studio itself. I don’t understand what have changed from yesterday to today (apart from updating vcpkg and gdal code itself). De: gdal-dev <gdal-dev-boun...@lists.osgeo.org><mailto:gdal-dev-boun...@lists.osgeo.org> En nombre de Abel Pau via gdal-dev Enviado el: dilluns, 26 de febrer de 2024 17:42 Para: Even Rouault <even.roua...@spatialys.com><mailto:even.roua...@spatialys.com>; gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org> Asunto: Re: [gdal-dev] Some problems after updating Hi Even, thanks for your answer. I paste here some of my variables: After too many months perhaps there are things that are not necessary, but the one you sais is there: GDAL_DATA D:\GitHub-repository\GDAL\build\data PATH PATH%; D:\GitHub-repository\GDAL\build\Debug; C:\Users\a.pau\AppData\Local\GitHubDesktop\bin; C:\Program Files\Graphviz\bin; D:\GitHub-repository\odbc-cpp-wrapper\build\src\odbc\Release; D:\mapes\programes\make-3.81-bin\bin; But same error appears :( De: Even Rouault <even.roua...@spatialys.com<mailto:even.roua...@spatialys.com>> Enviado el: dilluns, 26 de febrer de 2024 17:30 Para: Abel Pau <a....@creaf.uab.cat<mailto:a....@creaf.uab.cat>>; gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org> Asunto: Re: [gdal-dev] Some problems after updating hi, perhaps make sure that your PATH environment variable includes a directory that contains the gdal.dll of *your* build (should likely be D:\GitHub-repository\GDAL\build\Debug) before the one potentially coming from vcpkg Even Le 26/02/2024 à 17:20, Abel Pau via gdal-dev a écrit : Hi, usually (and always works) I call this two sentences from command line in Windows: cmake -B D:\GitHub-repository\GDAL\build -S . -DCMAKE_TOOLCHAIN_FILE=C:/dev/vcpkg/vcpkg/scripts/buildsystems/vcpkg.cmake cmake --build D:\GitHub-repository\GDAL\build The first one generates all projects that I can open with Visual Studio The second one compilates all files, and it ens with no problems. To test is works I’ve been using lots of line commands, for example this one (using the program ogr2ogr): D:\GitHub-repository\GDAL\build\apps\Debug\ogr2ogr.exe D:\mapes\2023\GDAL\Versions\Misteri_V20_a_V11.pol D:\mapes\2023\GDAL\Versions\Misteri_V20.pol -progress -lco Version=V1.1 --config CPL_DEBUG ON It’s been working untiel today when next error appears: --------------------------- ogr2ogr.exe - No se encuentra el punto de entrada --------------------------- No se encuentra el punto de entrada del procedimiento ?TransformWithErrorCodes@OGRCoordinateTransformation@@UEAAH_KPEAN111PEAH@Z en la biblioteca de vínculos dinámicos D:\GitHub-repository\GDAL\build\apps\Debug\ogr2ogr.exe. --------------------------- D'acord --------------------------- What is the diference between today and yesterday? I’ve done 2 things: 1. Download and Install VCPKG (the method that worked for me) 2. .\vcpkg\bootstrap-vcpkg.bat 3. .\vcpkg integrate install 4. .\vcpkg install gdal --triplet=x64-windows And, of course, download lasts codes from GDAL to be on date before finishing the job I’m doing. So, can anyone put some light to this mistery? What I am doing wrong this time? There is some dependence I am using wrong? I am a little desperate with that kind of errors. Thanks a lot! Abel Pau Garcia GIS developer [https://www.creaf.cat/sites/default/files/creaf-signature.png] a....@creaf.uab.cat<mailto:a....@creaf.uab.cat> Let's chat on Teams!<https://teams.microsoft.com/l/chat/0/0?users=a....@creaf.uab.cat> Tel. +34 934814277 [https://www.creaf.cat/sites/default/files/so-en-signature.png] [https://www.creaf.cat/sites/default/files/twitter-icon-signature.png]<https://twitter.com/CREAF_ecologia>[https://www.creaf.cat/sites/default/files/linkedin-icon-signature.png]<https://www.linkedin.com/company/1363052?trk=tyah&trkInfo=clickedVertical:company,clickedEntityId:1363052,idx:2-1-2,tarId:1465807877789,tas:creaf>[https://www.creaf.cat/sites/default/files/youtube-icon-signature.png]<https://www.youtube.com/c/creafecologia>[https://www.creaf.cat/sites/default/files/instagram-icon-signature.png]<https://www.instagram.com/CREAF_ecologia/> www.creaf.cat<http://www.creaf.cat> | http://blog.creaf.cat [https://www.creaf.cat/sites/default/files/uab_logo_signatura.png] CREAF. Campus UAB. Edifici C. 08193 Bellaterra (Barcelona) Before printing this electronic message, think about the environment. _______________________________________________ gdal-dev mailing list gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org> https://lists.osgeo.org/mailman/listinfo/gdal-dev -- http://www.spatialys.com My software is free, but my time generally not. _______________________________________________ gdal-dev mailing list gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org> https://lists.osgeo.org/mailman/listinfo/gdal-dev -- http://www.spatialys.com My software is free, but my time generally not. _______________________________________________ gdal-dev mailing list gdal-dev@lists.osgeo.org<mailto:gdal-dev@lists.osgeo.org> https://lists.osgeo.org/mailman/listinfo/gdal-dev
_______________________________________________ gdal-dev mailing list gdal-dev@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/gdal-dev
