DJ Delorie wrote: > That's it. Note that "clearance" is defined as "what you add to > thickness to get the cut thickness". I.e. for a 5 mil gap, you need a > 10 mil clearance. For a 6 mil gap, you'd need a 12 mil clearance, > etc.
This makes me nervous. My fab requires 6 mil minimum distance. I routed my board with clearence=10mil on all route styles. Yet, the DRC feels fine with minimum copper distance set to 6 mil... Just measured with the help of [ctrl-m]: 6 mil clearance translates to 6 mil gap from copper to copper (phew!). ---<(kaimartin)>--- -- Kai-Martin Knaak [EMAIL PROTECTED] http://lilalaser.de/blog _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
