On Fri, Feb 16, 2007 at 11:11:40PM -0500, DJ Delorie wrote: > > > Maybe the dialog should be task-oriented instead of setting-oriented. > > But if you can come up with a suitable scheme and a patch (it's all in > src/hid/ps.c) I'm open to convincing.
The current scheme, if I understand it, works like this: mirror | auto-mirror | result -------+-------------+------------------- 0 | 0 | as shown on screen 1 | 0 | all layers mirrored 0 | 1 | as if you were looking at the finished pcb 1 | 1 | suitable for toner transfer, transparencies So what about an option button that covers both bits with those descriptions? More advanced would be to produce one set suitable for an entire task. For example all 'assembly' drawings would print 'as if you were looking at the finished pcb', while copper layers would print 'suitable for toner transfer'. Then you could make and assemble a board from one print set. -- Ben Jackson AD7GD <[EMAIL PROTECTED]> http://www.ben.com/ _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user