I'm noticing some odd (and decidedly antisocial) behavior in the 20070208 snapshot of PCB.
I have two physically adjacent 0805-package resistors for which pin 1 is to be connected together. When I start a trace from pin 1 of the first resistor, it won't let me bring it anywhere near pin 1 of the second resistor. I've verified that "pin 1" is where I think it is, and that the netlist contains a net which links those two pads together. Further, the rat's nest does show that a connection between those two pads is required. This behavior occurs all over the board with different components. The netlist and PCB file were generated by gschem2pcb, by the way...the 20070526 snapshot. This behavior is most confusing. Under what conditions should PCB prevent the user from connecting a trace to a pad? Can anyone shed some light on this for me? Thanks, -Dave -- Dave McGuire Port Charlotte, FL _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user